Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
New Gulfe ATX power supply unit, matte black metal box with single fan and cable bundle

Gulfe

Gulfe ATX power supply replacement for HP Pavilion Elite HPE-375a HPE-460Z HPE-510es

SKU CH-MF6H-N9565

ATX power supply with reduced depth, 24-pin, 4-pin CPU, three SATA and two LP4 connectors for legacy HP desktops

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX reduced-depth design fits compact HP Elite cases
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • Dual-voltage 115/230 V input works worldwide
  • Over-current and over-power protection safeguards components
  • High-efficiency operation with low ripple and noise

Direct replacement for HP Pavilion Elite HPE-375a

This ATX power supply from Gulfe is built to fit the reduced-depth chassis of the listed HP Pavilion Elite desktops. It delivers the standard ATX connector plus a P4 12V 4-pin, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector. Builders restoring or repairing those specific models can install it without adapter cables. It is not suited for systems that need more than three SATA power leads or additional PCIe connectors.

Single fan cooling with 115/230 V input

The unit uses one fan and accepts 115 or 230 V AC at 47 to 63 Hz. Rise time is under 70 ms and hold-up time is at least 17 ms at nominal input. Output rails include +5 V, -5 V, +12 V1, +12 V2, +3.3 V, -12 V and +5 V standby. Over-current and over-power protection are built in, and the supplier notes high efficiency and low ripple and noise.

Compact dimensions for tight cases

Physical size is 5.86 inches by 3.3 inches with a 5.9 inch height and 3.4 inch width, allowing it to sit in shallow enclosures. Weight is 2.5 units. The reduced depth helps clearance but limits space for larger internal heatsinks, so sustained loads will raise exhaust temperature faster than in deeper units. Users running continuous heavy workloads should verify case airflow independently.

Punti di forza

  • ATX reduced-depth design fits compact HP Elite cases
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • Dual-voltage 115/230 V input works worldwide
  • Over-current and over-power protection safeguards components
  • High-efficiency operation with low ripple and noise

Caratteristiche tecniche

BrandGulfe
TypeATX
Fans1
Weight2.5

Domande su questo articolo

How do I install this Gulfe ATX power supply in an HP Pavilion Elite HPE-375a, and what step is often missed?

Mount the unit using its reduced-depth frame measuring 5.86 inches by 3.3 inches, connect the 24-pin ATX and 4-pin P4-12V cables to the motherboard, then attach the three SATA, two LP4 and one floppy connector to drives; the step often missed is setting the 115/230 V input switch to match your mains voltage before powering on.

What maintenance or replacement will this power supply need later?

The single internal fan is the only moving part; clean dust from its intake every 6 to 12 months with compressed air, and plan to replace the entire unit if the fan becomes noisy or if the 17 ms hold-up time drops below specification under load.

What limit appears first when this Gulfe unit runs at full load for long periods?

Thermal protection triggers first; the over-current and over-power circuits will shut the supply down if sustained draw approaches the combined +12V1 and +12V2 rail capacity, and the 70 ms rise time ensures rapid restart once temperatures fall.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.