Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Gulfe ATX power supply unit, silver metal casing, single fan grille, standard connector cables visible

Gulfe

Gulfe ATX Power Supply Replacement HP Pavilion HPE Elite h8 1247EZ

SKU CH-FQ6D-V6S7G

ATX power supply with reduced depth, 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors for HP Pavilion HPE Elite h8 1247EZ

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces several older legacy HP power supplies
  • ATX reduced depth 5.9" height fits tight cases
  • Input voltage 115 / 230 V worldwide use
  • Over current and over power protection included
  • Connectors: 24-pin ATX, 4-pin P4, three SATA, two LP4, one floppy

Direct replacement for HP Pavilion HPE Elite h8

This ATX power supply is built as a direct replacement for the HP Pavilion HPE Elite h8 1247EZ. Its reduced depth of 5.9 inches height by 3.4 inches width improves fit inside compact legacy chassis. The unit weighs 2.5 kilograms and includes a single cooling fan. It arrives new and ready for installation.

Steady output with protective limits

Under sustained load the power supply delivers multiple rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB. Over current and over power protection circuits guard components during continuous operation. Hold-up time is rated at 17 ms minimum at nominal input, while rise time stays below 70 ms. Hi-Pot testing confirms low ripple and noise across the operating range.

ATX connector set defines expandability

The unit provides one 24-pin (20+4) ATX connector, one P4 4-pin connector, three SATA 15-pin connectors, two LP4 4-pin connectors and one floppy 4-pin connector. This fixed assortment limits the number of drives and peripherals you can power simultaneously. Input voltage accepts 115 or 230 V at 47 to 63 Hz, so the supply works on 110/220 V mains without a selector switch.

Punti di forza

  • Replaces several older legacy HP power supplies
  • ATX reduced depth 5.9" height fits tight cases
  • Input voltage 115 / 230 V worldwide use
  • Over current and over power protection included
  • Connectors: 24-pin ATX, 4-pin P4, three SATA, two LP4, one floppy

Caratteristiche tecniche

BrandGulfe
TypeATX
Fans1
Weight2.5

Domande su questo articolo

How much heat and noise does the single built-in fan produce during all-day operation?

The unit uses one fan and includes over-current and over-power protection; hold-up time is at least 17 ms and rise time is below 70 ms, indicating stable delivery under sustained load.

Which connectors must my motherboard and drives already provide for this supply to plug in?

It requires a 24-pin ATX (20+4) socket, a 4-pin P4-12V CPU connector, three SATA 15-pin ports, two LP4 4-pin plugs and one floppy 4-pin connector.

Will the reduced-depth chassis and 115/230 V input work with the older HP Pavilion HPE Elite h8 1247EZ case and mains supply?

Dimensions are 5.86" × 3.3" with a 5.9" height, matching the legacy form factor, and the 115/230 V switchable input covers both mains standards.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.