HP
HP AP861A 1TB 7200 RPM SAS 6Gb/s 3.5" internal hard drive
1 TB 3.5" SAS hard drive spinning at 7200 RPM with a 6 Gb/s interface for server storage
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity1TB
- NAND Flash Memory TypeHard Drive
- RPM7200 RPM
- Average Latency6Gb/s
- 1 TB capacity for server storage
- 7200 RPM spindle for responsive data access
- SAS 6Gb/s interface for reliable connectivity
- 5 inch form factor fits standard drive bays
- HP StorageWorks P2000 series built for server environments
HP StorageWorks P2000 1TB SAS 6Gb/s Drive
This HP StorageWorks P2000 drive provides 1TB of storage on a SAS 6Gb/s interface. The 3.5-inch form factor spins at 7200 RPM for server workloads. It arrives as a bare drive without a mounting tray.
Server storage upgrades needing dual-port SAS
The dual-port SAS connection suits RAID arrays and shared-storage appliances that require path redundancy. Systems limited to single-port controllers or 3Gb/s backplanes will not use the full bandwidth. Builds requiring 2.5-inch bays cannot install this 3.5-inch unit.
SAS 6Gb/s dual-port interface decides fit
The controller and backplane must support SAS 6Gb/s dual-port operation to match the drive specification. A 3Gb/s or single-port host will limit throughput and remove failover capability. Verify the enclosure accepts 3.5-inch LFF drives before purchase.
Punti di forza
- 1 TB capacity for server storage
- 7200 RPM spindle for responsive data access
- SAS 6Gb/s interface for reliable connectivity
- 5 inch form factor fits standard drive bays
- HP StorageWorks P2000 series built for server environments
Caratteristiche tecniche
| Brand | HP |
|---|---|
| Series | StorageWorks P2000 |
| Model | AP861A |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 1TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| Peso di spedizione | 1.81 kg |
| Dimensioni del pacco | 249 × 201 × 168 mm |
Domande su questo articolo
Does the HP AP861A bare drive ship with a mounting tray or cables, or must they be sourced separately?
The drive is supplied as a bare unit only; any 3.5" SAS tray, mounting screws or data cables required for your HP StorageWorks P2000 enclosure or server must be purchased separately.
How do I decide between the 1TB 7.2K SAS model and other capacities in the P2000 range?
Choose the 1TB AP861A when you need a balance of capacity and 7200 RPM performance for near-line workloads; higher-capacity models in the same series increase raw space while lower-capacity models reduce cost per drive.
What does the 6Gb/s SAS rating mean for actual throughput inside an HP server?
The 6Gb/s SAS interface sets the link speed ceiling; real-world sustained transfer rates are governed by the 7200 RPM mechanical mechanism and the server's controller, so peak sequential throughput will be lower than the interface maximum.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
