HPE Juniper Networking
HPE Juniper Networking MIC-3D-2XGE-XFP 2-port XFP expansion card
Two-port XFP interface module expands Juniper MX Series Modular Port Concentrators with 10 Gigabit Ethernet connectivity
- TypeInterface Module
- Two 10 GbE ports expand network capacity
- XFP slots accept hot-swappable optics for flexible reach
- Plugs directly into MX Series MPC line cards
- Supports up to two MICs per MPC slot
- Purpose-built for high-density data networking
Two-Port XFP Expansion Module
The HPE Juniper Networking MIC-3D-2XGE-XFP is a modular interface card that adds two XFP expansion slots to a compatible Modular Port Concentrator. It is designed for data-networking environments that require additional 10GbE physical interfaces. This new module plugs directly into the MPC line card to extend port density.
Upgrade From Single-Port Or Fixed Configurations
The card replaces a single-port MIC or a fixed-port line card when the installation needs two independent XFP interfaces on one MPC slot. The jump is worth it when the chassis has free MPC capacity and the network design calls for dual 10GbE links without consuming an additional line-card slot.
Verify MPC Slot Availability
Before ordering, confirm that the target MX Series Modular Port Concentrator has an open MIC bay and that the total number of MICs per MPC does not exceed the supported limit. Also ensure that suitable XFP transceivers are on hand for the intended link distances.
Punti di forza
- Two 10 GbE ports expand network capacity
- XFP slots accept hot-swappable optics for flexible reach
- Plugs directly into MX Series MPC line cards
- Supports up to two MICs per MPC slot
- Purpose-built for high-density data networking
Caratteristiche tecniche
| Brand | Juniper |
|---|---|
| Type | Interface Module |
Domande su questo articolo
Which chassis slots accept this MIC-3D-2XGE-XFP module?
It plugs into any Juniper MX Series Modular Port Concentrator slot that supports MIC modules.
What is the correct insertion sequence for the two XFP transceivers?
Seat each transceiver fully until the latch clicks before tightening the module screws.
When should the XFP transceivers in this module be replaced?
Replace them when link errors increase or optical power drops below the transceiver specification.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



