IBM
IBM 00WG666 600GB 2.5" SAS 15K 12Gb/s internal hard drive
A 600 GB 2.5 inch SAS hard drive spinning at 15 000 RPM with a 12 Gb/s interface for high-throughput enterprise storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity600GB
- RPM15000 RPM
- Form Factor2.5"
- 600 GB capacity stores large datasets
- 15 000 RPM spindle speed accelerates data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray support simplifies drive replacement
Capacity and interface
The IBM 00WG666 is a 600GB 2.5 inch SAS drive spinning at 15000 RPM with a 12Gb/s transfer rate. It is built for enterprise servers and storage arrays that demand high random IOPS and consistent low latency.
Build quality and connectors
The bare drive uses a standard SAS connector and a hot-swap tray design for tool-less insertion into compatible drive bays. A 15K spindle speed and 12Gb/s interface support sustained throughput in multi-drive RAID configurations.
What to check before ordering
Verify that your backplane or controller supports 12Gb/s SAS and provides a 2.5 inch hot-swap bay. Confirm the system firmware recognises 600GB 15K drives and that your RAID controller lists this part number as compatible.
Punti di forza
- 600 GB capacity stores large datasets
- 15 000 RPM spindle speed accelerates data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray support simplifies drive replacement
Caratteristiche tecniche
| Brand | IBM |
|---|---|
| Model | 00WG666 |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 600GB |
| RPM | 15000 RPM |
| Form Factor | 2.5" |
Domande su questo articolo
What throughput does the 12Gb/s SAS interface actually deliver?
The 12Gb/s SAS link supports up to 12 gigabits per second; real-world throughput depends on the 15000 RPM mechanical speed and the host controller.
Which drive bay and tray does the 2.5" 600GB unit require?
It fits a standard 2.5-inch hot-swap bay and ships as a bare drive without a carrier tray.
How is the SAS drive installed in a hot-swap enclosure?
Slide the bare 2.5" drive into the hot-swap bay until the SAS connector seats firmly; the common mistake is stopping short of a full click.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



