Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

IBM

IBM 43W7622 1TB 7200 RPM SATA 3.0Gb/s 3.5" Simple Swap Internal Hard Drive

SKU CH-0KW7-9VWYB MPN 43W7622

A 1 TB 3.5-inch SATA hard drive spinning at 7200 RPM with simple-swap installation for IBM servers and workstations

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Average Seek Time9ms
  • Average Latency4.17ms
  • 1TB capacity for large data storage
  • 7200 RPM spindle speed for responsive performance
  • SATA 3.0Gb/s interface for broad compatibility
  • 5 inch form factor fits standard drive bays
  • Simple swap tray enables tool-less drive changes

1 TB SATA 3.0 Gb/s Simple-Swap Drive

This 1 TB 3.5-inch hard drive runs at 7 200 RPM on a SATA 3.0 Gb/s interface and is built for simple-swap bays in IBM eServer xSeries servers and IntelliStation workstations. It delivers 9 ms average seek time and 4.17 ms average latency for mid-range to advanced storage workloads. The bare-drive packaging suits system integrators and IT teams expanding existing arrays.

Replaces Slower or Smaller SATA Drives

The jump is worthwhile when moving from a lower-capacity or lower-RPM SATA drive that can no longer hold the working data set or meet throughput demands. The 7 200 RPM spindle and 3.0 Gb/s link raise sustained transfer rates without changing the host controller. Buyers who need higher areal density or a different interface should look elsewhere.

Fits 3.5-Inch Simple-Swap Bays

The drive slides into any 3.5-inch simple-swap tray that accepts a standard SATA data and power connector, freeing a hot-swap slot for other devices. No extra cabling or adapter is required beyond the backplane already present in compatible IBM chassis. Systems without a simple-swap backplane cannot use the tray mechanism.

Punti di forza

  • 1TB capacity for large data storage
  • 7200 RPM spindle speed for responsive performance
  • SATA 3.0Gb/s interface for broad compatibility
  • 5 inch form factor fits standard drive bays
  • Simple swap tray enables tool-less drive changes

Caratteristiche tecniche

BrandIBM
Model43W7622
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity1TB
RPM7200 RPM
Average Seek Time9ms
Average Latency4.17ms
FeaturesSatisfy midrange to advanced data-storage applications with this simple-swap, high-performance Serial ATA (SATA) hard disk drive in IBM eServer xSeries servers or IntelliStation workstations. Take advantage of simple-swap SATA technology to speed access to stored data and improve server processor usage and throughput.
Form Factor3.5"
Peso di spedizione1.36 kg
Dimensioni del pacco145 × 102 × 25 mm

Domande su questo articolo

Does the 3.5" 43W7622 fit a standard 3.5" drive bay or does it need a specific server tray?

The drive is a 3.5" form factor with a simple-swap tray. It mounts in IBM eServer xSeries or IntelliStation bays that accept simple-swap trays.

What is the correct way to install the SATA 3.0Gb/s simple-swap drive and what step is often missed?

Slide the tray into the bay until the connector seats firmly; the step often missed is not pushing far enough to engage the SATA backplane.

When should the 1TB 7200 RPM drive be replaced and what signs indicate it?

Replace the drive if SMART reports reallocated sectors, seek errors rise above normal, or average latency exceeds the 4.17ms specification.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.