Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

KHACHIMO

KHACHIMO 200W FlexATX 1U power supply SD-235PSU

SKU CH-BXJ9-7C83T

FlexATX 1U unit delivers 200 W with 80 PLUS Gold efficiency, Modern Standby support, zero-RPM fan mode and resonant LLC topology with DC-to-DC conversion

  • TypeATX
  • Modern Standby support gives near-instant wake times and better low-load efficiency
  • 80 PLUS Gold certification delivers high efficiency for lower power draw and cooler running
  • Zero RPM fan mode stops the fan at low and medium loads for silent operation
  • Resonant LLC topology with DC-to-DC conversion provides clean power and reduces coil whine
  • 200 W FlexATX 1U form factor fits compact POS and small-form-factor builds

Compact 1U FlexATX power supply

This KHACHIMO unit delivers 200 W of continuous power in a 1U FlexATX form factor, designed for slim desktop, POS and industrial chassis where space is at a premium. It carries 80 PLUS Gold certification and uses resonant LLC topology with DC-to-DC conversion to maintain tight voltage regulation and low ripple across the load range. Modern Standby compatibility ensures rapid wake times and improved efficiency at very low loads.

Suited for small-form-factor builds needing quiet.

The Zero RPM fan mode stops the fan completely at low and medium loads, making the supply near-silent in typical office or kiosk workloads. Builders who require more than 200 W for discrete graphics cards, multiple storage arrays or high-core-count CPUs should look at higher-wattage designs. Systems that need a standard ATX or SFX footprint will not fit this 1U chassis.

200 W maximum output decides fit

The single figure that determines suitability is the 200 W rated capacity; if the total system draw under full load stays below this ceiling the supply will operate within its certified efficiency band. Exceeding that limit risks protection trips or instability, so confirm the complete hardware power budget before selecting this model.

Punti di forza

  • Modern Standby support gives near-instant wake times and better low-load efficiency
  • 80 PLUS Gold certification delivers high efficiency for lower power draw and cooler running
  • Zero RPM fan mode stops the fan at low and medium loads for silent operation
  • Resonant LLC topology with DC-to-DC conversion provides clean power and reduces coil whine
  • 200 W FlexATX 1U form factor fits compact POS and small-form-factor builds

Caratteristiche tecniche

TypeATX

Domande su questo articolo

What clearance does this 1U FlexATX unit need inside a small chassis?

It is a 1U FlexATX form-factor supply rated at 200 W, designed to slide into slim enclosures that accept that exact size.

Which cables must be connected during installation, and where is the common mistake?

Attach the 24-pin ATX and 4/8-pin CPU connectors; the step often missed is enabling Modern Standby in the motherboard BIOS so the fast wake and low-load efficiency features activate.

What component will likely need attention after extended use?

The cooling fan, which runs in Zero RPM mode at low and medium loads, is the only moving part and the item most likely to require cleaning or replacement over time.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.