NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
KHACHIMO
ATX power supply with 80 PLUS Gold efficiency, 290 W output, 8-pin connector, Zero RPM fan mode, Modern Standby support and resonant LLC topology with DC-to-DC conversion
The KHACHIMO 290W ATX unit is built as a direct replacement for Dell OptiPlex 3020, 7020, 9020, 3670 and 1700 small-form-factor desktops. It fits the proprietary chassis and connector layout used across those five model families. Buyers who need a standard ATX PSU for a custom build or a non-Dell chassis cannot use this unit.
The only output that matters for compatibility is the single 8-pin connector wired to the Dell-specific pinout found on the listed OptiPlex boards. If your motherboard uses a 24-pin ATX header or requires additional PCIe power cables, this supply will not connect.
At 80 PLUS Gold certification the unit maintains high efficiency across the load range, reducing waste heat inside the compact case. The Zero RPM fan mode stops the fan completely at low and medium loads, while the resonant LLC topology with DC-to-DC conversion delivers clean power and suppresses coil whine during sustained operation.
| Type | ATX |
|---|
The 290 W rating is the maximum continuous power the unit can deliver across all rails, so it suits small-form-factor PCs with modest CPUs and no discrete graphics card.
It follows the ATX form factor, which fixes the physical dimensions and the 24-pin main connector layout, limiting it to cases and motherboards built for standard ATX power supplies.
The supply uses the standard ATX chassis footprint with four rear mounting holes, so it fits any case designed for an ATX power supply without extra brackets.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?