Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

KHACHIMO

KHACHIMO 740-028288 MX80 MX-5 MX-80 YM-2651D 501W power supply

SKU CH-SAFD-11XFM

ATX power supply delivering 501 W, tested working and ready for new builds

  • TypeATX
  • ATX form factor fits standard desktop cases
  • 501 W output powers typical mid-range systems
  • Tested working before shipment for reliability
  • Good quality components support stable operation
  • Compatible with MX80, MX-5, MX-80 and YM-2651D units

Identity and purpose

This KHACHIMO unit is a 501W ATX power supply built to the standard form factor. It is intended for desktop builders who need a tested, working unit to power a typical mid-range system.

Fit and limits

It suits anyone replacing a failed ATX supply or assembling a new chassis that accepts the standard layout. Builders who need modular cabling, higher wattage for multi-GPU configurations, or server-grade redundancy should look at other options.

Deciding specification

The single figure that determines fit is the 501W rated output; if the total system draw under load stays below that level the unit will handle it, otherwise a higher-capacity supply is required.

Punti di forza

  • ATX form factor fits standard desktop cases
  • 501 W output powers typical mid-range systems
  • Tested working before shipment for reliability
  • Good quality components support stable operation
  • Compatible with MX80, MX-5, MX-80 and YM-2651D units

Caratteristiche tecniche

TypeATX

Domande su questo articolo

What ATX case clearance does this 501W unit require?

It follows the standard ATX form factor so it fits any case designed for ATX power supplies.

Which cables must be connected during installation to avoid a no-post condition?

Seat the 24-pin ATX motherboard connector and the 4-pin or 8-pin CPU power connector firmly until they click.

When should the internal fan be cleaned or replaced on this supply?

Vacuum the intake grille when dust builds up; swap the fan if it develops bearing noise or stops spinning.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.