NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
KHACHIMO
Replacement ATX power supply for SGI and Rackable servers delivering 252W or 456W with 80 PLUS Gold efficiency, Modern Standby support.
This new ATX power supply is built as a direct replacement for SGI and RACKABLE systems using the AHW5DC252W and AHF5DC456W part numbers. It delivers up to 456 watts of continuous power with 80 PLUS Gold efficiency. The unit is designed for workstation and server environments that require reliable, standards-compliant power delivery.
The 80 PLUS Gold certification replaces older Bronze or unrated supplies to reduce waste heat and lower operating costs. Modern Standby compatibility upgrades legacy sleep states for faster wake times and better low-load efficiency. Zero RPM fan mode removes audible noise at light loads where older units would spin constantly. Resonant LLC topology with DC-to-DC conversion replaces group-regulated designs to provide tighter voltage regulation and reduce coil whine.
Confirm that your chassis accepts a standard ATX form factor and that the original unit matches the AHW5DC252W or AHF5DC456W model numbers. Check that the native connector layout matches your backplane and motherboard requirements without adapters. Ensure the 252W to 456W output range covers the peak draw of your installed processors, memory, and storage configuration.
| Type | ATX |
|---|
The unit follows the ATX form factor and fits standard ATX mounting holes in compatible SGI or Rackable chassis.
Slide the unit into the chassis bay, secure it with the four ATX mounting screws, then connect both the 24-pin main and 4/8-pin CPU power cables; the step often missed is fully seating the 24-pin connector until the latch clicks.
Periodically clean dust from the intake grill and fan blades with compressed air; the Zero RPM fan mode reduces bearing wear, so no scheduled fan replacement is required.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?