Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black rectangular 2.5 inch SATA SSD with smooth matte finish and silver label

KingSpec

KingSpec P3-1TB-FB 1TB 2.5" SATA III internal SSD

SKU CH-VR1M-Z600K

A 2.5-inch SATA III internal SSD with 1TB of 3D NAND storage delivering up to 560MB/s reads and 530MB/s writes for faster boot and load times

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity1TB
  • Memory Components3D NAND
  • InterfaceSATA III

Options P3-1TB-Soccer

  • Sequential read reaches 560 MB/s for fast boot and load times
  • Sequential write up to 530 MB/s speeds up file saves and installs
  • Random read 40,000 IOPS and random write 64,000 IOPS keep multitasking responsive
  • 480 TBW endurance rating supports heavy daily workloads over years
  • Idle power draw of 0.25 W extends laptop battery life

P3-FB Series 1TB SATA III SSD

The KingSpec P3-1TB-FB is a 2.5 inch internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and a SATA III 6Gbps interface to deliver sequential reads up to 560 MBps and writes up to 530 MBps.

Silent operation and low power draw

With no moving parts the drive runs completely silent in normal use. Idle power consumption is rated at 0.25W, helping to extend battery life on portable systems while keeping desktop power draw minimal.

Firmware features protect data and extend life

Native Command Queuing, TRIM, S.M.A.R.T., wear levelling, garbage collection and over-provisioning work together to maintain consistent performance. The drive is rated for 480TB written and a 1,000,000 hour MTBF.

Punti di forza

  • Sequential read reaches 560 MB/s for fast boot and load times
  • Sequential write up to 530 MB/s speeds up file saves and installs
  • Random read 40,000 IOPS and random write 64,000 IOPS keep multitasking responsive
  • 480 TBW endurance rating supports heavy daily workloads over years
  • Idle power draw of 0.25 W extends laptop battery life

Caratteristiche tecniche

BrandKingSpec
SeriesP3-FB Series
ModelP3-1TB-FB
Part NumberP3-1TB-FB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form Factor2.5"
Capacity1TB
Memory Components3D NAND
InterfaceSATA III
ProtocolSATA
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 530 MBps
4KB Random ReadUp to 40,000 IOPS
4KB Random WriteUp to 64,000 IOPS
Terabytes Written (TBW)480TB
MTBF1,000,000 hours
HeatSinkwithout HeatSink
Features1.SATA 6Gbps interface;
2. Support wear leveling;
3. Support Garbage collection;
4. Support Over-provisioning;
5. Support Native Command Queuing (NCQ);
6. Support TRIM;
7.Support S.M.A.R.T. ;
Power Consumption (Idle)0.25W
Power Consumption (Active)1.85W
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +75°C
Operating Humidity5-95%
Height7.00mm
Width70.00mm
Depth100.4mm
Weight50g

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install the 2.5" SATA drive and which step is often missed?

Connect the drive to a SATA data cable and a SATA power connector, then enable AHCI mode in the BIOS before cloning or installing the OS; skipping AHCI leaves the drive running in legacy IDE mode.

What maintenance will the 1TB 3D NAND SSD need over its 480 TBW rated life?

No user maintenance is required; the controller handles wear leveling, garbage collection, over-provisioning and TRIM automatically, while S.M.A.R.T. attributes report health until the 480 TBW limit is approached.

At what point does sustained write performance hit its ceiling on this SATA III drive?

Sequential writes top out at 530 MBps and random writes at 64,000 IOPS; once the SLC cache fills during heavy sustained writes, speeds will throttle to the native TLC NAND rate.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.