Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small rectangular board with 1.64 inch AMOLED touchscreen display showing colorful graphics

LORDWORLD

LORDWORLD ESP32-S3 1.64inch AMOLED Touch Development Board 280×456

SKU CH-P95M-BC7KS

A 1.64 inch AMOLED capacitive touch display board with 280 by 456 resolution, 16.7 million colours, 178 degree viewing angle, ESP32-S3 Wi-Fi and Bluetooth 5 connectivity for IoT development

  • Vibrant 16.7M colour AMOLED display with 178° wide viewing angle
  • Sharp 280×456 resolution on compact 1.64inch touchscreen
  • Responsive capacitive touch via FT3168 controller
  • Dual wireless with 2.4 GHz Wi-Fi 802.11 and Bluetooth 5
  • ESP-IDF and Arduino IDE support for rapid development

Compact IoT display board

The LORDWORLD ESP32-S3 development board integrates a 1.64-inch AMOLED capacitive touch panel with a 280×456 resolution. It uses the CO5300 display driver and FT3168 touch controller to deliver 16.7M colours and a 178° viewing angle. Wireless connectivity includes 2.4 GHz Wi-Fi 802.11 and Bluetooth 5 LE with mesh support.

Screen capacity and wireless headroom

The AMOLED panel handles rich graphical interfaces, live sensor dashboards and smooth animations within the ESP32-S3 memory budget. Complex 3D rendering or sustained high-frame-rate video will exceed the onboard resources. Wi-Fi bandwidth of 40 MHz suits typical IoT telemetry and OTA updates but not heavy media streaming.

Upgrade path from basic LCD modules

Makers moving from monochrome OLEDs or small TFT LCDs gain touch input, wider colour gamut and native wireless stacks in one module. The jump is worth it when a project needs simultaneous display, touch and cloud connectivity without wiring multiple shields. Builders who need larger screens or higher GPIO counts should look elsewhere.

Punti di forza

  • Vibrant 16.7M colour AMOLED display with 178° wide viewing angle
  • Sharp 280×456 resolution on compact 1.64inch touchscreen
  • Responsive capacitive touch via FT3168 controller
  • Dual wireless with 2.4 GHz Wi-Fi 802.11 and Bluetooth 5
  • ESP-IDF and Arduino IDE support for rapid development

Caratteristiche tecniche

BrandLORDWORLD

Domande su questo articolo

Will the 1.64 inch AMOLED display and QSPI interface work with my existing ESP32 projects?

The board uses an ESP32-S3 with a CO5300 display driver over QSPI and an FT3168 capacitive touch chip, so existing ESP-IDF or Arduino sketches that target those peripherals can be adapted with minimal changes.

How can I verify the 280 by 456 resolution and 178 degree viewing angle are performing correctly after setup?

Run a test pattern that fills the 16.7 million colour AMOLED panel edge to edge and view it from extreme angles; the image should remain sharp and colour-accurate at 178 degrees.

Does the box include a USB cable or power supply for the 2.4 GHz Wi-Fi and Bluetooth 5 module?

The development board itself is supplied; a USB-C cable and 5 V power source for the ESP32-S3 wireless subsystem must be purchased separately.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.