LORDWORLD
LORDWORLD SlimSAS 8i SFF-8654 to SlimSAS 8i SFF-8654 Cable 0.5M MB406L-B
Connects NVMe or Tri-mode HBA/RAID cards with a 0.5 m SFF-8654 SlimSAS cable rated for PCIe 4.0 and secured by locking latches
- Secure PCIe 4.0 performance with SFF-8654 connectors
- Locking latch design prevents accidental disconnection
- SFF-9402 compliant for NVMe HBA and RAID cards
- 5 metre length suits tight server builds
- UL20744 certified for safety compliance
Cable Overview
This LORDWORLD SlimSAS 8i SFF-8654 cable provides a direct 0.5 metre link between matching ports. Connectors meet SFF-8654 design specifications and support PCIe 4.0 transfer speeds. The locking latch design secures each connection against vibration. It is built for internal NVMe storage configurations.
Suitable Builds
The half-metre length fits tight server or workstation chassis where HBA or RAID cards sit close to backplanes. SFF-9402 compliant construction suits mainstream NVMe and Tri-mode controller cards. UL20744 certification confirms the cable meets recognised safety requirements. Installers needing longer routing distances or different connector styles will require an alternative product.
Deciding Spec
The 0.5 metre length is the critical dimension that determines whether this cable reaches between your controller and backplane. Measure the internal path before ordering; a cable that is too short cannot be extended without adding connectors that may degrade signal integrity.
Punti di forza
- Secure PCIe 4.0 performance with SFF-8654 connectors
- Locking latch design prevents accidental disconnection
- SFF-9402 compliant for NVMe HBA and RAID cards
- 5 metre length suits tight server builds
- UL20744 certified for safety compliance
Caratteristiche tecniche
| Brand | LORDWORLD |
|---|
Domande su questo articolo
How do I confirm the cable is delivering PCIe 4.0 speeds after installation?
Verify the link runs at PCIe 4.0 in the HBA or RAID controller BIOS and check that NVMe drives report expected throughput in the operating system.
What comes in the box and what must be purchased separately?
The package contains the 0.5 m SlimSAS 8i SFF-8654 to SlimSAS 8i SFF-8654 cable only; NVMe drives, HBA or RAID cards and any mounting hardware are sold separately.
When should I choose the 0.5 m version instead of a longer cable?
Select the 0.5 m length when the controller and backplane are close together to minimise signal loss and keep cable routing tidy.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



