Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black plastic dual M.2 SSD cloner dock with vertical open-air slots, USB-C cable and power adapter

MAIWO

MAIWO Dual M.2 NVMe SATA Cloner 20Gbps USB 3.2 Gen 2x2 Drive Enclosure

SKU CH-JVD2-9C1Z6

Dual-bay M.2 NVMe and SATA SSD cloner with offline duplication, 20Gbps USB 3.2 Gen 2x2 host link, tool-free vertical open-air design and 360-degree passive cooling

  • ColorBlack
  • SizeM.2
  • AC AdapterYes
  • MaterialClassic Plastic
  • Internal InterfaceM.2 NVME M-Key
  • External InterfaceUSB 3.1 Type-C
  • Offline cloning without a computer for quick backups
  • 20 Gbps USB 3.2 Gen 2x2 transfer for rapid data moves
  • Supports 2230 2242 2260 2280 22110 M.2 NVMe and SATA SSDs
  • Tool-free vertical open-air design acts as 360-degree heat sink
  • Dual bay enables simultaneous duplication of two drives

Dual M.2 NVMe SATA cloner for offline duplication

This enclosure duplicates two M.2 drives without a host computer. It accepts NVMe M-Key and SATA B+M Key modules in sizes 2230, 2242, 2260, 2280 and 22110. The tool-free vertical bays allow quick swaps for backups or migrations. It is not suited for users who need RAID spanning or hardware encryption.

Passive 360-degree cooling with external power

The open-air plastic chassis acts as a heatsink around both drives, dissipating heat without a fan. An included AC adapter powers the unit so the USB bus is not loaded. Silent operation suits quiet workspaces. Builders who require active airflow for sustained heavy writes should note the passive design.

20Gbps USB 3.2 Gen 2x2 host link

A USB 3.1 Type-C cable connects the dock to Windows, macOS, Linux, iPadOS, Android or PS5 at up to 20Gbps. Plug-and-play drivers mean no software install for cloning or external access. Users whose systems lack a 20Gbps port will see lower transfer rates.

Punti di forza

  • Offline cloning without a computer for quick backups
  • 20 Gbps USB 3.2 Gen 2x2 transfer for rapid data moves
  • Supports 2230 2242 2260 2280 22110 M.2 NVMe and SATA SSDs
  • Tool-free vertical open-air design acts as 360-degree heat sink
  • Dual bay enables simultaneous duplication of two drives

Caratteristiche tecniche

BrandMAIWO
ModelM.2 NVMe SSD Cloner
ColorBlack
SizeM.2
AC AdapterYes
MaterialClassic Plastic
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB 3.1 Type-C
FanNo
Dimensions156*105*56mm

Domande su questo articolo

How do I install an M.2 2280 NVMe SSD into the MAIWO cloner without tools?

Slide the SSD into either M-Key slot at a slight angle, press down until the notch catches, then secure it with the built-in latch — no screwdriver is needed.

What part of the MAIWO cloner will need replacement first under heavy use?

The USB 3.1 Type-C port and the internal M-Key connectors endure the most insertions; if they loosen, the whole enclosure must be replaced.

What thermal limit appears first during a sustained 20Gbps NVMe-to-NVMe clone?

The open-air plastic chassis relies on passive 360-degree cooling; without a fan, drive throttling typically occurs before the enclosure itself overheats.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.