Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Twelve green DDR5 RDIMM sticks in a row, bare chips, gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-W5N4-G49D3

1.1 TB kit of twelve 96 GB DDR5 5600 CL46 ECC registered RDIMMs validated for Supermicro H14DST-F

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Mostra altre 30 configurazioni
  • 1TB total capacity with twelve 96GB modules for maximum memory density
  • DDR5-5600 speed at CL46 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture with 2Rx4 organization enables full population stability
  • 10V operation matches server memory controller specifications exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F motherboard compatibility

Exact-match DDR5 kit for Supermicro H14DST-F

This 1.1 TB kit contains 12 modules of 96 GB each, built as 288-pin DDR5 RDIMMs with ECC and registered buffering. It is designed for the Supermicro H14DST-F motherboard, where the memory controller expects this exact rank, voltage and timing configuration. The modules arrive new and ready for installation in all 12 slots.

Sustained-load behaviour with registered ECC

Registered architecture offloads the memory controller so every slot runs fully populated at the rated 5600 MT/s without signal degradation over long periods. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during continuous server workloads. The 1.10 V operating voltage supports stable operation across extended duty cycles.

DDR5-5600 interface limits

The PC5-44800 standard sets a maximum data rate of 5600 MT/s and a CAS latency of CL46 for this module class. Population rules on the H14DST-F board dictate the supported capacity per channel and the required DIMM installation order. Builders who need higher frequencies, lower latencies or non-registered modules must select a different memory specification.

Punti di forza

  • 1TB total capacity with twelve 96GB modules for maximum memory density
  • DDR5-5600 speed at CL46 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture with 2Rx4 organization enables full population stability
  • 10V operation matches server memory controller specifications exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F motherboard compatibility

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How much heat and power will the 12-module DDR5 5600 kit draw when the server runs continuously?

Each 96GB RDIMM operates at 1.10V and the registered design reduces electrical load on the memory controller, helping the fully populated 1.1TB configuration stay within the board's thermal envelope.

What motherboard slot type and population rules must my Supermicro H14DST-F already have to accept this 12x96GB kit?

The board needs 12 free 288-pin DDR5 RDIMM slots and must support 2Rx4 registered modules at the rated speed; the kit matches the exact rank, voltage and timing the controller expects.

Will the CL46 registered ECC modules work alongside any older DDR5 RDIMMs I keep in the same H14DST-F system?

Mixing different ranks, capacities or latencies is not supported by the memory controller; all 12 slots should be filled with this matched 2Rx4 CL46 kit for stable operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.