Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM 128GB 8x16GB DDR5-4800 ECC RDIMM CL40 1Rx8 1.1V Supermicro H14SST-G memory upgrade

SKU CH-TMR5-3F0J9

128 GB DDR5-4800 ECC registered server kit of eight 16 GB modules at CL40 and 1.1 V, validated for Supermicro H14SST-G motherboards

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact-match 128 GB kit for Supermicro H14SST-G runs at rated DDR5-4800 speed
  • Registered ECC architecture corrects single-bit errors preventing silent data corruption
  • 1Rx8 1.1 V CL40 modules match the memory controller timing expectations
  • Eight 16 GB 288-pin RDIMMs populate every slot at full capacity
  • Lifetime replacement warranty with free US-based technical support included

Exact-match DDR5 server kit

This 128GB kit contains eight 16GB DDR5-4800 RDIMMs built to the precise rank, voltage and timing the Supermicro H14SST-G motherboard expects. Registered ECC architecture with CL40 latency and 1.1V operation lets every slot run fully populated at rated speed. It is designed for administrators who need guaranteed capacity recognition without manual tuning. Buyers who need UDIMM, SODIMM or non-ECC modules should look elsewhere.

Straightforward slot installation

The 288-pin RDIMM form factor drops into the board's DIMM slots using standard server procedure; no heat spreader means clearance is not a concern. Consult the motherboard manual for the approved population order before seating all eight modules, as population rules vary by platform. Skipping that step is the most common reason a full kit does not post at full capacity.

DDR5-4800 registered ECC spec

The single specification that decides fitment is the DDR5-4800 (PC5-38400) registered ECC RDIMM profile with 1Rx8 organisation, CL40 timing and 1.1V voltage. If your system requires a different speed, rank structure, voltage or unbuffered memory, this kit will not be recognised or will run at reduced capability.

Punti di forza

  • Exact-match 128 GB kit for Supermicro H14SST-G runs at rated DDR5-4800 speed
  • Registered ECC architecture corrects single-bit errors preventing silent data corruption
  • 1Rx8 1.1 V CL40 modules match the memory controller timing expectations
  • Eight 16 GB 288-pin RDIMMs populate every slot at full capacity
  • Lifetime replacement warranty with free US-based technical support included

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How can I confirm the kit is running at DDR5-4800 with CL40 and ECC active after installation?

Enter the server BIOS or UEFI and verify the memory speed reads 4800 MT/s, CAS latency shows 40, and ECC status is reported as enabled for all 128 GB.

What does the package contain and is anything else required to install it in a Supermicro H14SST-G?

The box includes eight 16 GB DDR5-4800 1Rx8 ECC RDIMM modules (128 GB total); no extra cables, brackets or heat spreaders are needed for the 288-pin slots.

Should I choose this 8 x 16 GB kit or a different capacity for the H14SST-G?

Select this 128 GB kit when your workload needs the full eight-module population at 4800 MT/s with registered ECC; choose a smaller kit only if the board manual limits total capacity or slot count.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.