Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1600 CL11 1.35V desktop RAM

SKU CH-WPBC-AKD3N

A 16 GB dual-channel DDR3 kit running at 1600 MHz with CL11 latency and 1.35 V low-voltage operation

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 8GB
  • 16GB (2 x 8GB)
  • 16 GB kit expands multitasking headroom
  • Dual 8 GB modules enable dual-channel bandwidth
  • DDR3 1600 CL11 delivers responsive throughput
  • 35 V low-voltage operation reduces power draw
  • 240-pin UDIMM fits standard desktop slots

Kit DDR3 16 Go 1600 CL11 1.35 V

Ce kit de 16 Go (2 × 8 Go) DDR3 1600 (PC3-12800) fonctionne en 1.35 V avec une latence CL11. Il est monté sur format UDIMM 240 broches non-ECC et non bufferisé. Les puces proviennent de Samsung, Micron ou Hynix selon les lots. L'ensemble est conçu pour une mise à niveau simple de PC de bureau.

Compatibilité et exclusions

Le module convient aux cartes mères acceptant de la DDR3 1600 en tension 1.35 V. Les systèmes qui n'acceptent que 1.35 V sans marge supérieure pourront l'utiliser. En revanche, les plateformes exigeant de l'ECC, de la mémoire registered ou une tension différente ne sont pas concernées. Vérifiez le manuel de la carte mère avant achat.

Tension de fonctionnement 1.35 V

La tension nominale de 1.35 V est le paramètre qui détermine l'adéquation avec votre matériel. Si votre carte mère ne prend en charge que cette valeur, le kit est compatible. Si elle impose une tension supérieure exclusive, ce produit ne conviendra pas.

Punti di forza

  • 16 GB kit expands multitasking headroom
  • Dual 8 GB modules enable dual-channel bandwidth
  • DDR3 1600 CL11 delivers responsive throughput
  • 35 V low-voltage operation reduces power draw
  • 240-pin UDIMM fits standard desktop slots

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD12800-828K2
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Should I choose the 16GB kit or look for a single 16GB module?

This kit supplies two 8GB modules for a total of 16GB. Running them in matched pairs enables dual-channel bandwidth on most desktop boards.

Will the 1600MHz rating actually run at that speed in my PC?

The modules are rated DDR3 1600 (PC3-12800) at CL11. They will operate at 1600MHz when the motherboard supports that frequency and XMP or manual timing is set correctly.

Does the 240-pin DDR3 interface limit the bandwidth I can get?

Yes. The 240-pin DDR3 UDIMM interface caps transfer rates at the DDR3 1600 (PC3-12800) level, so faster DDR generations cannot be used in the same slots.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.