Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR4 RDIMM sticks, no heat spreader, gold contacts, 288 pins

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 ECC RDIMM CL22 1.2V 288-pin memory upgrade

SKU CH-5333-X9K0W

Registered DDR4 ECC server memory kit, 16 GB in two 8 GB modules at 3200 MT/s CL22 1.2 V for ASRock Rack ROMED8-2T EPYC boards

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 16GB 2X8GB

Mostra altre 4 configurazioni
  • ECC protection maintains data integrity for critical workloads
  • Registered DDR4 3200 speed delivers stable server performance
  • 2V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits ASRock EPYC motherboards
  • Dual-rank 1Rx8 organisation maximises capacity per channel

ECC RDIMM kit for EPYC servers

This NEMIX RAM kit provides 16 GB of DDR4 3200 registered ECC memory in a matched pair of 8 GB modules. It targets administrators who need validated stability on ASRock Rack ROMED8-2T motherboards running AMD EPYC processors. The modules operate at 1.2 V with CL22 latency and use major OEM DRAM from Samsung, Micron or Hynix.

Upgrade from non-ECC or slower RDIMMs

Replacing unbuffered consumer DIMMs or lower-speed registered modules eliminates data-corruption risk and matches the platform’s qualified memory list. The jump is worth it when workloads demand error correction and the motherboard requires registered DIMMs to populate all slots at rated speed.

Fits ASRock Rack ROMED8-2T DDR4 slots

Each 288-pin RDIMM installs directly into the server board’s memory channels without heat spreaders that could interfere with tight heatsink clearance. The 1Rx8 organisation leaves additional ranks available per channel for future capacity expansion while keeping the memory controller within its supported load limits.

Punti di forza

  • ECC protection maintains data integrity for critical workloads
  • Registered DDR4 3200 speed delivers stable server performance
  • 2V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits ASRock EPYC motherboards
  • Dual-rank 1Rx8 organisation maximises capacity per channel

Caratteristiche tecniche

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will these 288-pin DDR4 RDIMMs fit the DIMM slots on my ASRock Rack ROMED8-2T motherboard?

Yes, the 288-pin RDIMM form factor matches the DDR4 slots on the ASRock Rack ROMED8-2T, and the kit is validated for that board.

Do I need to populate specific slots or follow a channel order when installing this 2x8GB kit?

Install one module per memory channel, typically using the same-coloured slots first; consult the ROMED8-2T manual for the exact population sequence.

Are the Samsung, Micron or Hynix ICs on these modules user-serviceable or replaceable later?

No, the DRAM chips are soldered to the PCB; if a module fails you replace the entire DIMM rather than individual components.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.