NEMIX RAM 16GB DDR4 2133 CL15 1.2V 260-Pin SODIMM
- 16GB
- 260-Pin DDR4 SO-DIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A 16 GB DDR3 laptop module running at 1866 MHz with CL13 latency and 1.35 V low voltage
Capacity 16GB
This 16 GB module uses 204-pin DDR3 technology at 1866 MHz with CL13 latency. It operates at 1.35 V and is unbuffered non-ECC. The stick fits laptops, all-in-one PCs, small-form-factor systems and compatible NAS devices.
The single 16 GB rank replaces two smaller sticks or a single 8 GB module when the platform supports this density. The jump is worth it when the system board and BIOS accept 2Rx8 organisation at PC3-14900 speed.
Modules are stress-tested under load to verify stability during extended operation. The 1.35 V rating helps limit thermal output during continuous use in compact chassis. No heat spreader is fitted, so airflow across the PCB manages temperature.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS14900-628LK1 |
| Capacity | 16GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
This module uses the standard 204-pin DDR3 SO-DIMM form factor. It fits any laptop, AIO, SFF or NAS device that accepts DDR3 SO-DIMMs.
Align the notch on the gold edge with the key in the slot, insert the stick straight in until the contacts are fully hidden, then press down evenly until both side clips snap into the notches.
No firmware or thermal pads are involved. The module is unbuffered non-ECC DDR3 at 1.35 V with CL13 latency; if it passes initial stress testing it runs for the system's life without maintenance.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?