Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 288-pin DDR4 UDIMM module, no heat spreader, 16GB ECC CL19 1.2V

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC UDIMM CL19 2Rx8 1.2V 288-pin server RAM

SKU CH-VFYE-6XFPE

16 GB DDR4 2666 ECC UDIMM CL19 2Rx8 1.2 V 288-pin server memory module for QNAP NAS

  • Capacity16GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • 16 GB capacity expands server memory for demanding workloads
  • ECC UDIMM detects and corrects single-bit errors for data integrity
  • DDR4 2666 CL19 timing delivers responsive throughput at 1.2 V
  • 2Rx8 dual-rank organisation increases bandwidth per module
  • 288-pin unbuffered design fits compatible QNAP NAS and server boards

16 GB DDR4 ECC UDIMM for QNAP NAS

This 16 GB DDR4-2666 ECC unbuffered module is built for QNAP NAS devices that accept 288-pin UDIMM memory. It targets administrators who need error-correcting capacity for file serving, backup or virtualization workloads. The single-rank 2Rx8 organisation runs at 1.2 V with CL19 latency. No heat spreader is fitted.

Upgrade from non-ECC or lower-capacity sticks

Replacing standard unbuffered DDR4 without ECC adds single-bit error correction that protects data integrity in always-on NAS appliances. The jump is worthwhile when the system logs correctable memory errors or when ZFS and similar filesystems demand ECC for silent corruption prevention. Existing 8 GB modules can be displaced to double usable memory per slot.

Verify motherboard slot count

Confirm the NAS motherboard supports 288-pin DDR4 UDIMM at 2666 MT/s and accepts 16 GB per slot. Check the vendor’s qualified-vendor list for the ME21300-628K1 part number or the QNAP RAM-16GDR4ECP0-UD-2666 reference. Ensure the BIOS or firmware revision permits unbuffered ECC operation before ordering.

Punti di forza

  • 16 GB capacity expands server memory for demanding workloads
  • ECC UDIMM detects and corrects single-bit errors for data integrity
  • DDR4 2666 CL19 timing delivers responsive throughput at 1.2 V
  • 2Rx8 dual-rank organisation increases bandwidth per module
  • 288-pin unbuffered design fits compatible QNAP NAS and server boards

Caratteristiche tecniche

BrandNEMIX RAM
SeriesQNAP NAS Device Memory
ModelQNAP NAS Memory
Part NumberME21300-628K1
Capacity16GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible

Domande su questo articolo

Will this 288-pin DDR4 UDIMM fit my motherboard's memory slots?

The module uses the standard 288-pin DDR4 UDIMM form factor and runs at 1.2 V, so it fits any desktop or server board with DDR4 UDIMM slots that accept 2666 MT/s ECC unbuffered memory.

What is the correct way to seat the module, and what step do people often miss?

Align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that the speed reads 2666 MT/s and ECC is enabled; the step often missed is confirming ECC operation in firmware.

When should I replace this 16 GB DDR4 2666 CL19 2Rx8 ECC UDIMM?

Replace it if memory diagnostics report uncorrectable errors, if the system fails to boot with the module installed, or if you need capacity beyond 16 GB per slot.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.