Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular DDR4 RDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 ECC RDIMM Gigabyte MZ01-CE0 EPYC memory upgrade

SKU CH-XZT3-WMFJV

16 GB DDR4 3200 ECC registered RDIMM for Gigabyte MZ01-CE0 EPYC servers

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 ECC RDIMM boosts server capacity
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 registered design fits Gigabyte MZ01-CE0 EPYC boards
  • Samsung Micron Hynix chips tested under load for stability
  • 288-pin module installs in minutes without special tools

16GB DDR4 3200 ECC RDIMM for Gigabyte EPYC boards

This 16GB DDR4 3200 module is built as a registered ECC RDIMM for Gigabyte MZ01-CE0 motherboards running AMD EPYC processors. It operates at 1.2V with CL22 latency and uses a 2Rx8 organisation across 288 pins. The module is validated for server workloads that require error correction and registered signalling.

Server admins needing single-module ECC capacity

The single 16GB stick suits administrators who want to add one registered ECC module to a compatible Gigabyte EPYC platform. Builders who need unbuffered UDIMMs, non-ECC memory, higher frequencies or lower latencies should look elsewhere.

Check motherboard slot population rules

Verify that the MZ01-CE0 accepts a 2Rx8 registered DIMM in the target slot and that the BIOS revision supports DDR4 3200 at 1.2V. Confirm the channel population order required by the EPYC CPU before installing the 288-pin module.

Punti di forza

  • 16 GB DDR4 3200 ECC RDIMM boosts server capacity
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 registered design fits Gigabyte MZ01-CE0 EPYC boards
  • Samsung Micron Hynix chips tested under load for stability
  • 288-pin module installs in minutes without special tools

Caratteristiche tecniche

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Domande su questo articolo

Does the Gigabyte MZ01-CE0 motherboard require registered ECC memory for this module to function?

Yes, the board is an AMD EPYC server platform that only accepts registered ECC RDIMMs, and this module matches that requirement exactly.

Can I mix this 3200 MT/s CL22 stick with slower DDR4 RDIMMs already installed in the server?

The memory controller will downclock all modules to the speed of the slowest installed DIMM, so mixing is possible but overall bandwidth will drop.

How can I verify the module is running at 3200 MT/s with ECC active after installation?

Check the BIOS memory information screen or run a tool such as dmidecode; it should report 3200 MT/s, CL22 timings and ECC enabled for the DIMM.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.