Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR4 RDIMM modules with gold contacts and black chips

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR4 2933MHz PC4-23400 CL21 288-Pin ECC RDIMM memory upgrade

SKU CH-J5PP-631ST

A 256 GB DDR4 registered ECC kit of four 64 GB modules running at 2933 MHz with CL21 latency for Dell Precision 7920 workstations

  • Capacity256GB (4 x 64GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 256 GB total capacity with four 64 GB modules
  • DDR4 2933 MHz speed rated at PC4-23400
  • ECC registered design detects and corrects data errors
  • Low 1.20 V operation reduces power draw
  • Validated for Dell Precision 7920 Rack/Tower Workstation

Dell Precision 7920 Compatible Memory

This 256GB kit contains four 64GB DDR4 2933MHz registered ECC RDIMM modules built for Dell Precision 7920 rack and tower workstations. The modules operate at 1.2V with CL21 latency and a 4Rx4 organisation across 288 pins.

Upgrading from smaller registered kits

Replacing lower-capacity RDIMM sets with this 256GB configuration adds the headroom needed for large datasets, virtualisation hosts and memory-bound rendering workloads. The jump is worth it when the workstation already runs registered memory and the motherboard supports 64GB per slot.

Registered DDR4 platform limits

Registered DDR4 requires a chipset and CPU that support ECC and buffered signalling; consumer platforms cannot use these modules. The 2933MHz speed is the maximum JEDEC rate for this generation, so bandwidth scales only by adding populated channels, not by higher frequencies.

Punti di forza

  • 256 GB total capacity with four 64 GB modules
  • DDR4 2933 MHz speed rated at PC4-23400
  • ECC registered design detects and corrects data errors
  • Low 1.20 V operation reduces power draw
  • Validated for Dell Precision 7920 Rack/Tower Workstation

Caratteristiche tecniche

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-944K4
Capacity256GB (4 x 64GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank4Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR4 2933MHZ PC4-23400 4Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Domande su questo articolo

Does the 288-pin DDR4 RDIMM form factor fit the Dell Precision 7920 Rack/Tower Workstation?

Yes, the kit is built as a Dell DDR4 2933MHz RDIMM Registered Server Memory module with 288 pins, matching the Precision 7920 memory slots exactly.

What is the correct order for populating the four 64GB 4Rx4 modules during installation?

Install each 64GB module into the DIMM slots following the sequence shown in the Dell Precision 7920 owner's manual; the 4Rx4 rank layout requires that specific channel order for the system to recognise all 256GB.

When should the registered ECC RDIMM kit be replaced if correctable error counts start rising?

Replace the kit when the system logs show a sustained increase in correctable ECC errors, indicating the 4Rx4 DDR4 2933MHz modules are approaching end of reliable service life.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.