Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Single green DDR5 ECC UDIMM with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB 1x32GB DDR5 4800 ECC UDIMM 2Rx8 1.1V

SKU CH-M1Q2-YA0MK

A single 32 GB DDR5 module running at 4800 MHz with ECC and 1.1 V operation for error-correcting server workloads

  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • Rank2Rx8
  • 32 GB single module simplifies capacity upgrades
  • DDR5 4800 speed supports modern server workloads
  • ECC protection guards data integrity in critical tasks
  • 1 V operation reduces power draw per module
  • 2Rx8 dual-rank layout boosts memory density per slot

Capacity and Use

This is a 32GB DDR5 4800 ECC UDIMM module built for workstations and servers that require error-correcting unbuffered memory. It suits administrators upgrading a single slot or building a system with one DIMM per channel. Buyers who need registered or load-reduced DIMMs cannot use this module.

Sustained Operation

The module runs at 1.1V with CAS latency 40 and a 2Rx8 organisation, delivering stable throughput under continuous server workloads. Major OEM chips from Samsung, Micron or Hynix provide consistent signal integrity during extended duty cycles. Systems without DDR5 4800 support will not reach the rated speed.

Installation Notes

The 288-pin UDIMM fits standard DDR5 slots and installs like any unbuffered DIMM. Common issues include mixing this ECC module with non-ECC memory or populating slots in an order the motherboard manual does not support. BIOS must be set to the correct voltage and speed for the module to post reliably.

Punti di forza

  • 32 GB single module simplifies capacity upgrades
  • DDR5 4800 speed supports modern server workloads
  • ECC protection guards data integrity in critical tasks
  • 1 V operation reduces power draw per module
  • 2Rx8 dual-rank layout boosts memory density per slot

Caratteristiche tecniche

BrandNEMIX RAM
ModelPart#: ME38400-328K1-SM-SYS-111AD-HN2-01-G2
Part NumberPart#: ME38400-328K1-SM-SYS-111AD-HN2-01-G2
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Domande su questo articolo

How much heat does the 1.1 V DDR5 4800 ECC UDIMM produce when running continuously?

The module operates at 1.1 V with DDR5 4800 speed and CAS 40 latency, which keeps power draw low during sustained workloads.

What motherboard slot and memory controller are required for this 288‑pin 2Rx8 ECC UDIMM?

A DDR5‑compatible motherboard with a 288‑pin UDIMM slot and an integrated memory controller that supports ECC unbuffered modules is needed.

Will this DDR5 4800 ECC UDIMM downclock to work in a system that only supports lower DDR5 speeds?

DDR5 modules negotiate speed with the memory controller; if the platform only supports lower DDR5 data rates, the kit will run at the highest mutually supported speed.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.