Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR4 UDIMM sticks, no heat spreaders, 288-pin

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 1.2V 288-pin UDIMM for ASRock TRX40 Taichi memory upgrade

SKU CH-0JF5-ZS7B6

A 32 GB DDR4 3200 kit of two 16 GB unbuffered UDIMMs at 1.2 V with CL22 timing for the ASRock TRX40 Taichi motherboard

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands capacity for demanding workloads
  • Dual 16 GB modules enable dual-channel throughput
  • DDR4 3200 speed matches platform specification
  • CL22 latency at 1.20 V for stable operation
  • 288-pin UDIMM form factor fits ASRock TRX40 Taichi

Targeted 32 GB DDR4 kit for ASRock TRX40 Taichi

This 32 GB kit contains two 16 GB unbuffered UDIMMs rated at DDR4 3200 with CL22 timings at 1.20 V. It is built specifically for the ASRock TRX40 Taichi motherboard and uses major-brand Samsung, Micron or Hynix chips for system-specific compatibility.

Sustained-load behaviour without heat spreaders

Modules run at the standard 1.20 V without a heat spreader, relying on case airflow to manage temperature during long workloads. The 1Rx8 organisation and CL22 latency deliver stable throughput for typical desktop and workstation tasks under continuous use.

Straightforward two-slot installation

The 288-pin UDIMM form factor fits the board's standard DIMM slots and requires no extra configuration beyond seating the modules firmly. Builders should verify the motherboard manual for the correct slot population order to avoid a no-post condition.

Punti di forza

  • 32 GB kit expands capacity for demanding workloads
  • Dual 16 GB modules enable dual-channel throughput
  • DDR4 3200 speed matches platform specification
  • CL22 latency at 1.20 V for stable operation
  • 288-pin UDIMM form factor fits ASRock TRX40 Taichi

Caratteristiche tecniche

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-618K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Domande su questo articolo

How much power does the 32GB DDR4 3200 kit draw at its rated 1.20V?

Each 16GB module operates at 1.20V, the standard DDR4 voltage, so the pair draws minimal power and generates little heat during continuous operation.

What motherboard slot and chipset must I already have for this 288-pin UDIMM kit to work?

You need an ASRock TRX40 Taichi motherboard with four 288-pin DDR4 DIMM slots; the kit is validated for that specific platform.

Will the CL22 1Rx8 modules run stably alongside any older DDR4 sticks I keep in the other two slots?

The kit is tested for the TRX40 Taichi at 3200 MT/s CL22; mixing different ranks or latencies can force the board to run all memory at the slowest common settings.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.