Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 260-Pin SODIMM Kit POSIFLEX ZT-3715E

SKU CH-KCZ3-3Q5R7

DDR4 SODIMM kit adds 32 GB across two 16 GB modules at 3200 MHz CL22 for the Posiflex ZT-3715E terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands POS terminal capacity
  • DDR4 3200 speed matches system requirements
  • CL22 latency supports stable operation
  • 2 V voltage reduces power draw
  • 260-pin SODIMM fits POSIFLEX ZT-3715E

System-Specific DDR4 Kit for POSIFLEX ZT-3715E

This 32 GB kit contains two 16 GB DDR4 3200 SODIMM modules built for the POSIFLEX ZT-3715E Haydn ZT Series point-of-sale terminal. The memory runs at 1.20 V with a CAS latency of CL22 and uses a 2Rx8 rank configuration on 260-pin unbuffered non-ECC sticks.

What the Kit Changes for the Terminal

Adding the matched pair doubles the installed capacity to 32 GB and enables dual-channel operation on the supported platform. The modules are tested for compatibility with the POSIFLEX POS series, so the terminal recognises the full speed of PC4-25600 without manual configuration.

Suitable for POS Upgrades, Not for General Laptops

This kit suits technicians upgrading a POSIFLEX ZT-3715E terminal that requires DDR4 3200 SODIMM memory in a 2 x 16 GB layout. It does not suit builders who need ECC error correction, registered modules, a heat spreader, or memory validated for consumer laptops or desktop motherboards.

Punti di forza

  • 32 GB kit expands POS terminal capacity
  • DDR4 3200 speed matches system requirements
  • CL22 latency supports stable operation
  • 2 V voltage reduces power draw
  • 260-pin SODIMM fits POSIFLEX ZT-3715E

Caratteristiche tecniche

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Domande su questo articolo

Will the 2Rx8 rank configuration on these 16GB modules require any future firmware updates for the POSIFLEX ZT-3715E?

The 2Rx8 organisation is a physical DRAM layout; it does not trigger firmware updates. The memory operates at the JEDEC 1.20 V standard and needs no software maintenance after installation.

What thermal limit appears first when the kit runs continuously at DDR4 3200 inside the ZT-3715E chassis?

Without a heat spreader the DRAM relies on case airflow; the first limit is the module's maximum operating temperature, which the system's internal fan curve manages under sustained load.

How much power does the 32GB kit draw at 1.2 V when the terminal operates all day?

At the rated 1.2 V the two 16 GB modules draw only a few watts total, adding negligible heat and no audible noise to the POSIFLEX ZT-3715E during continuous operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.