Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR5 RDIMM modules, black chips, no heat spreader, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V 288-Pin ECC Registered RDIMM for Supermicro H13SSF

SKU CH-TXD6-SY39J

A 32 GB dual-channel kit of 288-pin DDR5 5600 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SSF expects

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity from a matched 2×16 GB kit for full-speed operation
  • DDR5-5600 CL46 at 1.1 V delivers rated throughput without manual tuning
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 288-pin 1Rx8 form factor matches the Supermicro H13SSF memory slots exactly
  • Built with major OEM DRAM chips for enterprise-grade reliability

Exact-match DDR5 RDIMM kit for Supermicro H13SSF

This NEMIX RAM kit delivers 32GB as two 16GB DDR5 5600 CL46 registered ECC modules at 1.1V. The 288-pin RDIMM form factor and 1Rx8 rank match the motherboard's memory controller expectations so the full capacity is recognised at rated speed. It is built for servers that require registered ECC memory and will not work in systems needing unbuffered UDIMMs or SODIMMs.

Thermals noise and power draw

Operating at the standard DDR5 voltage of 1.1V, these modules draw minimal power and run without heat spreaders in the directed airflow of a server chassis. Registered buffering reduces electrical load on the memory controller, keeping power draw steady even with all slots populated. No active cooling is included; thermal performance depends entirely on the system's own fan configuration.

Upgrade from lower-capacity or non-ECC DDR5

The kit replaces smaller DDR5 RDIMM sets or non-ECC modules that lack error correction and registered buffering. The jump is worth it when workloads demand maximum supported capacity, data integrity through ECC, and stable operation with every DIMM slot filled. Boards limited to UDIMM or SODIMM form factors cannot use this memory.

Punti di forza

  • 32 GB capacity from a matched 2×16 GB kit for full-speed operation
  • DDR5-5600 CL46 at 1.1 V delivers rated throughput without manual tuning
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 288-pin 1Rx8 form factor matches the Supermicro H13SSF memory slots exactly
  • Built with major OEM DRAM chips for enterprise-grade reliability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Domande su questo articolo

How do I install these DDR5 RDIMMs in the Supermicro H13SSF and what step is often missed?

Power down, open the chassis, and insert each 288-pin module into the DIMM slots following the motherboard's population order for 1Rx8 Registered ECC memory; the step often missed is confirming the exact slot sequence in the H13SSF manual before seating the modules.

What maintenance or replacement will this memory kit need over its service life?

No routine maintenance is required for these DDR5 ECC RDIMMs; they have no heat spreader and no moving parts, so replacement only occurs if a module fails or a capacity upgrade is needed.

What limit appears first when the kit runs sustained workloads on the H13SSF?

The DDR5-5600 CL46 1.10V specification defines the maximum sustained data rate and latency; with 1Rx8 registered organisation the memory controller and thermal envelope of the board become the limiting factors before the modules themselves.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.