Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 ECC RDIMM CL40 1Rx4 1.1V memory upgrade

SKU CH-JKFW-XJEZK

A 32 GB DDR5-4800 ECC registered DIMM with CL40 latency and 1.1 V operation for compatible Hynix server platforms

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection safeguards data integrity in critical workloads
  • Registered DDR5 design improves signal stability on server platforms
  • 32 GB capacity expands memory headroom for virtualization
  • 4800 MT/s speed delivers high bandwidth for demanding applications
  • 1 V operation reduces power draw per module

Server-grade DDR5 capacity

This NEMIX RAM module delivers 32GB of DDR5 memory at 4800MHz with ECC and registered buffering. It operates at 1.1V with a CL40 latency and a 1Rx4 rank configuration. The 288-pin RDIMM form factor targets compatible server and workstation motherboards.

Replacing slower or non-ECC memory

The jump is worthwhile when workloads demand registered ECC stability at DDR5 speeds. Systems currently running lower-frequency DDR5 or unbuffered non-ECC modules gain error correction and signal integrity for sustained loads. Buyers who need more than 32GB per slot or a different rank structure should verify platform limits before ordering.

DDR5 registered DIMM constraints

The 288-pin DDR5 RDIMM interface requires a motherboard with registered DDR5 memory controllers and appropriate BIOS support. ECC functionality depends on platform-level enablement. Modules without heat spreaders rely on chassis airflow for thermal management. Compatibility is specific to systems qualified for this registered DDR5 standard.

Punti di forza

  • ECC protection safeguards data integrity in critical workloads
  • Registered DDR5 design improves signal stability on server platforms
  • 32 GB capacity expands memory headroom for virtualization
  • 4800 MT/s speed delivers high bandwidth for demanding applications
  • 1 V operation reduces power draw per module

Caratteristiche tecniche

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHynix
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Domande su questo articolo

Will this 288-pin DDR5 RDIMM fit in a standard server motherboard slot?

Yes, the module uses the standard 288-pin DDR5 RDIMM form factor and requires a compatible registered DIMM slot.

Is any special BIOS setting needed to run this ECC registered memory at 4800 MHz?

The module operates at 1.1 V with CL40 latency; enable XMP or manually set speed, voltage and timings in BIOS if the system does not apply them automatically.

Does the lack of a heat spreader mean the chips need active airflow in a 1U chassis?

Without a heat spreader the DRAM relies on chassis airflow; ensure front-to-back cooling delivers sufficient air velocity across the module.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.