SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00499261BTC
Disponibile
NEMIX RAM
NEMIX RAM 384GB (4x96GB) DDR5 6400 CL52 1.1V 2Rx4 ECC RDIMM Supermicro H13DSG-OM memory upgrade
384GB DDR5 6400 ECC RDIMM kit of four 96GB modules at CL52 and 1.1V, validated for Supermicro H13DSG-OM
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from four 96 GB modules
- DDR5 6400 speed with CL52 latency at 1.10 V
- Registered ECC RDIMM prevents data corruption under load
- 2Rx4 dual-rank layout matches Supermicro H13DSG-OM requirements
- 288-pin form factor installs directly in server DIMM slots
Purpose-Built Server Memory Kit
This 384 GB kit consists of four 96 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation. It targets administrators upgrading a Supermicro H13DSG-OM platform that requires registered ECC modules in a 288-pin form factor.
Upgrade Path and Compatibility
The kit replaces any lower-capacity or slower DDR5 RDIMM set currently installed in the H13DSG-OM, delivering the exact rank configuration and voltage the board's memory controller expects. The jump is worthwhile when the workload demands the full 384 GB at rated speed across all populated slots without downclocking.
Build Integration
Each module uses a 2Rx4 registered ECC design that offloads the memory controller, allowing full population while correcting single-bit errors on the fly. The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not work in UDIMM or SODIMM slots. Verify the motherboard manual for approved population order before installation.
Punti di forza
- 384 GB total capacity from four 96 GB modules
- DDR5 6400 speed with CL52 latency at 1.10 V
- Registered ECC RDIMM prevents data corruption under load
- 2Rx4 dual-rank layout matches Supermicro H13DSG-OM requirements
- 288-pin form factor installs directly in server DIMM slots
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Domande su questo articolo
Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13DSG-OM motherboard slots?
Yes, the kit uses 288-pin DDR5 RDIMM form factor which matches the Supermicro H13DSG-OM motherboard requirements. The registered ECC design is exactly what this board expects for full-capacity operation.
What is the correct installation order for the four 96GB modules on the H13DSG-OM?
Install modules following the motherboard manual's DIMM population sequence for 4 DIMMs per channel. The 2Rx4 rank structure and CL52 timing require exact slot placement so the memory controller initialises all 384GB at DDR5-6400 speed.
Do these 1.1V DDR5 RDIMMs need active cooling or heatsinks over time?
The modules ship without heat spreaders and operate at standard 1.10V. In a properly ventilated server chassis the registered design runs within thermal limits, so no extra cooling or heatsink retrofits are required during their service life.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.00095512BTC
Disponibile