Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR5 RDIMM modules, bare chips, no heat spreaders, 288-pin, 512GB kit

NEMIX RAM

NEMIX RAM 512GB (4x128GB) DDR5 4800 CL40 1.1V 4Rx4 ECC RDIMM memory upgrade

SKU CH-60YC-Q0KGH

A 512 GB registered DDR5 kit of four 128 GB ECC modules running at 4800 MT/s with CL40 latency for compatible Supermicro servers

  • Capacity512GB (4 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512GB total capacity with four 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 latency at 1.1V operating voltage
  • ECC registered RDIMM for error-correcting server reliability
  • 288-pin 4Rx4 design validated for Supermicro X13SEM systems

512 GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 512 GB of DDR5 memory across four 128 GB modules. Each module runs at 4800 MT/s with CL40 latency at 1.10 V. The 288-pin registered DIMMs include on-die ECC and a 4Rx4 organisation for data integrity in demanding workloads.

For Supermicro X13SEM platforms

The kit is validated for Supermicro SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-TF systems. Builders using other motherboards or consumer chipsets should verify qualified vendor lists before purchasing, as registered ECC DIMMs will not function in unbuffered slots.

Registered 4Rx4 ECC at 1.10 V

The combination of registered signalling, 4Rx4 density and on-die ECC at 1.10 V determines compatibility. Only systems that explicitly support DDR5 RDIMMs with this rank structure and voltage will POST and operate correctly with this kit.

Punti di forza

  • 512GB total capacity with four 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 latency at 1.1V operating voltage
  • ECC registered RDIMM for error-correcting server reliability
  • 288-pin 4Rx4 design validated for Supermicro X13SEM systems

Caratteristiche tecniche

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K4
Capacity512GB (4 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (4X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Domande su questo articolo

Will the 288-pin DDR5 RDIMM modules fit the DIMM slots on a SuperMicro SYS-211E-FRN2T server?

Yes, the kit is built as a 288-pin DDR5 RDIMM package specifically for SuperMicro SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-TF platforms.

What is the correct sequence for populating the four 128 GB modules on a dual-processor SuperMicro board?

Install one module per channel following the motherboard manual slot order — typically CPU0 channel A then B, then CPU1 channel A then B — and seat each RDIMM until the ejectors click.

How long do the Samsung, Micron or Hynix DRAM chips on these registered ECC RDIMMs last under continuous server workloads?

The major OEM DRAM chips are rated for continuous operation; ECC corrects single-bit errors and the registered buffer reduces electrical load, so modules typically run for the server's service life without replacement.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.