NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 6400 CL52 1.1V 2Rx8 ECC RDIMM memory upgrade
64 GB dual-rank DDR5-6400 ECC RDIMM kit with CL52 timing and 1.1 V operation, validated for Supermicro H14DST-F motherboards
- Capacity64GB (2 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 64 GB total capacity from two 32 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency matches the controller's rated timing
- 1 V registered ECC design reduces power draw and corrects single-bit errors
- 288-pin RDIMM form factor fits the Supermicro H14DST-F memory slots exactly
- Lifetime replacement warranty with US-based technical support included
Server Memory Kit for Supermicro H14DST-F
This 64GB kit contains two 32GB DDR5 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors before they reach production workloads. It is not for systems that require unbuffered UDIMMs or SODIMM form factors.
DDR5 6400 Registered Interface Limits
The modules operate at DDR5 6400 (PC5-51200) with CL52 latency at 1.10V using 288-pin RDIMM connectors. Registered buffering offloads the memory controller so full-capacity population remains stable, but the board's own population rules still dictate which slots must be filled first. Maximum capacity and supported ranks are defined by the motherboard manual, not by the modules alone.
Installation and Common Pitfalls
Align the 288-pin key notch with the slot, press evenly until the latches click, then verify population order in the H14DST-F manual before powering on. Mismatched rank configuration or incorrect slot sequence are the usual reasons the system fails to recognise the full 64GB at 6400MHz. No heat spreaders are fitted, so ensure case airflow meets the server's thermal design.
Punti di forza
- 64 GB total capacity from two 32 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency matches the controller's rated timing
- 1 V registered ECC design reduces power draw and corrects single-bit errors
- 288-pin RDIMM form factor fits the Supermicro H14DST-F memory slots exactly
- Lifetime replacement warranty with US-based technical support included
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Domande su questo articolo
Should I choose the 64GB kit or would a 32GB module be enough for my Supermicro H14DST-F?
The 64GB kit provides two 32GB modules, filling two slots and giving the maximum dual-channel capacity this board supports with registered DIMMs.
Will the DDR5 6400 CL52 rating actually run at 6400 MT/s on the H14DST-F?
Yes, the kit is spec-matched to the board's memory controller so it initialises at the rated 6400 MT/s with CL52 timings at 1.1V.
Does the 288-pin RDIMM interface limit how many modules I can install?
The registered architecture offloads the memory controller, allowing every supported slot to run fully populated at the full 6400 MT/s speed.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



