BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278954BTC
Disponibile
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1.1V 288-Pin UDIMM Kit
64 GB kit of four 16 GB DDR5 modules at 4800 MT/s CL40, 1.1 V, unbuffered non-ECC 288-pin UDIMM for ASRock Z790 Lightning WiFi
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit gives ample capacity for demanding workloads
- DDR5 4800 MT/s speed supports high-throughput desktop tasks
- CL40 latency at 1.10 V balances responsiveness with efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
- Four 16 GB modules enable quad-channel bandwidth on compatible boards
ASRock Z790 Lightning WiFi Compatible Kit
This 64GB kit contains four 16GB DDR5 UDIMM modules built for the ASRock Z790 Lightning WiFi motherboard. Each stick runs at 4800 MT/s with CL40 latency at 1.1V. The unbuffered non-ECC design targets desktop builders who need a matched set validated for this specific board.
4800 MT/s CL40 DDR5 Speed
The single specification that decides fit is the DDR5 4800 PC5-38400 rating with CL40 timings at 1.10V. Your motherboard must support this exact data rate and voltage; slower or faster JEDEC profiles will not match the kit’s tested configuration. No heat spreader is fitted, so airflow over the bare PCB is required.
Four-Slot Population Frees Upgrade Path
Populating all four DIMM slots with 1Rx8 modules delivers 64GB immediately and leaves no empty slots for later expansion. The 288-pin DDR5 form factor fits standard desktop sockets, but the board must accept four ranks per channel at this speed. Builders who want room to add more memory later should consider a two-module kit instead.
Punti di forza
- 64 GB kit gives ample capacity for demanding workloads
- DDR5 4800 MT/s speed supports high-throughput desktop tasks
- CL40 latency at 1.10 V balances responsiveness with efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
- Four 16 GB modules enable quad-channel bandwidth on compatible boards
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Domande su questo articolo
What does the DDR5 4800 speed rating mean for actual system performance?
The kit operates at 4800 MT/s with CL40 latency, giving the memory controller a baseline data rate of PC5-38400 for everyday workloads.
How does the DDR5 interface and PC5-38400 rating limit real-world throughput?
The DDR5 4800 standard caps the modules at 4800 MT/s; the PC5-38400 designation confirms that peak transfer rate, so bandwidth cannot exceed this specification.
What physical clearance is needed to install these four 288-pin UDIMM modules?
Each 16 GB stick is a standard-height 288-pin UDIMM without a heat spreader, so it fits any desktop DDR5 slot with normal DIMM spacing.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00281549BTC
Disponibile
