NEMIX RAM
NEMIX RAM 768GB (8x96GB) DDR5 6400 CL52 2Rx4 ECC RDIMM Supermicro H14DSG-OD
768 GB DDR5-6400 ECC registered server memory kit with eight 96 GB modules at CL52 and 1.1 V, validated for the Supermicro H14DSG-OD motherboard
- Capacity768GB (8 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB total capacity from eight 96 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM architecture prevents silent data corruption
- 2Rx4 dual-rank organisation for full-slot population
- Verified compatibility with Supermicro H14DSG-OD motherboard
Exact-match server upgrade
This 768GB kit delivers eight 96GB DDR5 6400 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H14DSG-OD memory controller expects. The modules operate at 1.1V with CL52 latency and a 2Rx4 organization so the board recognises full capacity and runs at rated speed without manual tuning.
Registered ECC stability for full population
Registered buffering offloads the memory controller allowing every slot to run fully populated at 768GB while on-die ECC corrects single-bit errors before they reach production workloads. The 288-pin RDIMM form factor matches the board's physical slots and the kit ships without heat spreaders to fit dense server chassis airflow paths.
Verify population rules before ordering
Server memory support varies by model and BIOS revision so consult the Supermicro H14DSG-OD manual for approved DIMM population order, maximum supported capacity per channel and any required firmware updates. Buyers needing a different total capacity or a UDIMM form factor cannot use this kit.
Punti di forza
- 768 GB total capacity from eight 96 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM architecture prevents silent data corruption
- 2Rx4 dual-rank organisation for full-slot population
- Verified compatibility with Supermicro H14DSG-OD motherboard
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K8 |
| Capacity | 768GB (8 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 8X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Domande su questo articolo
Does this kit run at the full DDR5 6400 speed on the Supermicro H14DSG-OD, or will the memory controller cap it lower?
The kit is rated DDR5 6400 (PC5-51200) with CL52 timing at 1.1 V. The Supermicro H14DSG-OD memory controller supports this speed when populated per the board's qualified-vendor list, so the modules operate at their rated 6400 MT/s.
Will these 288-pin RDIMMs physically fit the H14DSG-OD DIMM slots, or do I need a different form factor?
The board requires 288-pin Registered (RDIMM) DDR5 modules. This kit provides exactly eight 288-pin RDIMMs, so they seat directly in the motherboard's DDR5 slots without adapters.
What is the correct population order for all eight 96 GB modules on the H14DSG-OD, and which step do installers most often miss?
Follow the motherboard manual's DIMM population sequence for eight RDIMMs — typically filling one DIMM per channel in the prescribed order. The step most often missed is verifying the exact slot order in the manual before inserting all eight modules.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



