NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 240-Pin UDIMM Kit
- 8GB (2 x 4GB)
- 240-Pin DDR3 UDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
Dual-channel 8 GB DDR3 SODIMM kit running at 1333 MHz with 1.35 V low-voltage operation
Capacity 8GB (2 x 4GB)
This NEMIX RAM kit supplies 8 GB of DDR3 memory in two 4 GB modules running at 1333 MHz with CL9 latency. The 204-pin SODIMM form factor fits standard laptop, all-in-one and small-form-factor slots that accept PC3-10600 unbuffered non-ECC modules.
It suits owners of DDR3-era laptops, AIOs or NAS devices that need a matched pair of 1.50 V modules without ECC or registered buffers. Systems that require ECC, registered DIMMs or a different DDR generation cannot use this kit.
The modules operate at 1.50 V, so the host platform must support that voltage for stable operation. Verify the laptop or device specification before purchase to ensure the 1.50 V requirement matches the system design.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS10600-428LK2 |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The modules use a standard 204‑pin DDR3 SO‑DIMM connector found in most laptops, AIOs, SFF PCs and NAS units that accept DDR3 memory.
Yes, the kit is specified at 1.35 V and 1.50 V, so it will operate at the higher voltage if the platform requires it.
Open Task Manager or CPU‑Z and check that the memory speed shows 1333 MHz with a CAS latency of 9.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?