BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
8 GB DDR4 2400 MHz CL17 SODIMM runs at 1.2 V with 260 pins for laptop upgrades
This NEMIX RAM module provides 8 GB of DDR4 memory in a 260-pin SO-DIMM form factor. It suits laptops, all-in-one PCs, small-form-factor desktops and NAS devices that accept standard unbuffered SODIMMs. The stick is sold new and carries a single-rank 1Rx8 organisation.
The module runs at 2400 MT/s (PC4-19200) with a CAS latency of 17 and a standard operating voltage of 1.20 V. It is non-ECC and unbuffered, so it will only work in platforms that support consumer DDR4 SODIMMs without error correction or registered signalling.
At 1.20 V the module draws little power and produces negligible heat, so it adds no audible fan noise and does not raise system temperatures in normal use. The absence of a heat spreader reflects its low thermal output.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS19200-818K1 |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
The module is rated DDR4 2400 (PC4 19200). Your laptop's memory controller decides the final speed; many systems default to the highest JEDEC speed both the CPU and module support.
The 260-pin SO-DIMM form factor fits DDR4 laptop, all-in-one, small-form-factor and NAS slots. It cannot be used in desktop DIMM sockets or DDR5-only platforms.
No heat spreader is fitted. The bare 260-pin PCB follows standard SO-DIMM height, so it installs in the usual laptop memory slot without additional clearance.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?