Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM 8GB DDR4 2933MHz ECC RDIMM HPE P19040-B21 memory upgrade

SKU CH-4Q7E-YF1T3

8GB DDR4 2933MHz ECC RDIMM registered server memory with CL21 latency and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 2933MHz ECC RDIMM expands server memory capacity
  • Registered design with ECC maintains data integrity under load
  • CL21 latency at 1.2V balances speed and power efficiency
  • 288-pin 1Rx8 module built with major OEM Samsung Micron Hynix chips
  • Validated for HPE P19040-B21 compatible systems ensures drop-in fit

HPE-compatible DDR4 ECC RDIMM

This 8GB DDR4 2933MHz registered DIMM is built for HPE servers and workstations that require ECC error correction. It operates at 1.2V with CL21 latency and uses a 288-pin RDIMM form factor. The module is validated for systems referencing the HPE P19040-B21 part number.

Suited for registered-memory platforms only

IT administrators upgrading compatible HPE hardware will find this single-rank 1Rx8 module a direct fit. Buyers needing unbuffered UDIMM memory for consumer motherboards cannot use this registered design. Systems limited to lower DDR4 speeds or non-ECC configurations should look at alternative memory types.

Registered ECC with 1Rx8 organisation

The single-rank registered architecture with on-die ECC is the specification that determines compatibility. It requires a motherboard chipset and BIOS that support registered DDR4 modules at 2933MHz. Verify your platform documentation for RDIMM support and maximum capacity per slot before purchasing.

Punti di forza

  • 8GB DDR4 2933MHz ECC RDIMM expands server memory capacity
  • Registered design with ECC maintains data integrity under load
  • CL21 latency at 1.2V balances speed and power efficiency
  • 288-pin 1Rx8 module built with major OEM Samsung Micron Hynix chips
  • Validated for HPE P19040-B21 compatible systems ensures drop-in fit

Caratteristiche tecniche

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Domande su questo articolo

How do I install the 288-PIN DDR4 RDIMM and which slot-population rule do I follow?

Power down the HPE server, open the chassis, align the module key with the DIMM slot, press firmly until both ejector clips lock, then populate slots in the order shown in the server's service guide to match the 1Rx8 rank layout.

Will the Samsung, Micron or Hynix chips on this module need any firmware updates or scheduled replacement?

The DRAM chips are sealed components with no user-serviceable firmware; they require no scheduled replacement under normal server operating conditions.

At what point does the CL21 latency at 2933 MT/s become the bottleneck during sustained workloads?

Under continuous heavy memory traffic the fixed CL21 timing at 2933 MT/s limits throughput before thermal or voltage constraints appear.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.