Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM DDR5 4800 1.1TB 12x96GB ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-6WRT-H9PQ7

1.1 TB DDR5-4800 ECC registered kit with twelve 96 GB modules, 2Rx4 rank, CL40 latency and 1.10 V operation for Supermicro H13SSW servers

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 1TB total capacity from 12 matched 96GB modules
  • DDR5 4800 speed with CL40 latency at 1.10V
  • Registered ECC RDIMM prevents data errors under load
  • 2Rx4 dual-rank layout maximises density per slot
  • 288-pin form factor built for Supermicro H13SSW

Exact-Match Server Memory Kit

This 1.1 TB DDR5 kit contains twelve 96 GB registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSW motherboard expects. The modules run at DDR5-4800 (PC5-38400) with CL40 latency at 1.10 V, allowing the server to recognise full capacity and operate at rated speed immediately.

Who This Suits and Who Should Look Elsewhere

System administrators upgrading a Supermicro H13SSW platform will find the 288-pin RDIMM form factor and registered architecture match the board's population rules. Buyers who need unbuffered UDIMMs, SODIMMs, a different capacity per module, or memory for any other motherboard model cannot use this kit.

The Deciding Specification

Twelve 96 GB modules deliver 1.1 TB total capacity in a single verified kit for the Supermicro H13SSW. If your server requires a different module count, density or form factor, this part will not fit.

Punti di forza

  • 1TB total capacity from 12 matched 96GB modules
  • DDR5 4800 speed with CL40 latency at 1.10V
  • Registered ECC RDIMM prevents data errors under load
  • 2Rx4 dual-rank layout maximises density per slot
  • 288-pin form factor built for Supermicro H13SSW

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How much power does the 1.10V DDR5 4800 kit draw when the Supermicro H13SSW runs fully populated all day?

Each 96GB module operates at 1.10V DDR5 standard voltage; total system draw depends on the H13SSW memory controller and workload, so consult the motherboard manual for populated-slot power figures.

What motherboard slot configuration does the 12 x 96GB RDIMM kit require on the H13SSW?

The kit uses 288-pin DDR5 RDIMM form factor; the H13SSW manual defines the exact population order and maximum capacity per channel for 2Rx4 registered modules.

Will the CL40 2Rx4 registered ECC modules work alongside any existing DDR5 RDIMMs already installed in the H13SSW?

Mixing ranks, latencies or capacities can prevent the H13SSW from running at 4800MHz; the board manual specifies which combinations are validated for stable operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.