Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Eight green DDR5 RDIMM sticks without heat spreaders in a 128GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 128GB 8x16GB CL46 1.1V ECC RDIMM memory upgrade

SKU CH-4SHZ-7XESR

Eight 16 GB DDR5 modules deliver 128 GB of registered ECC memory at 5600 MT/s with CL46 latency and 1.1 V operation

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Mostra altre 24 configurazioni
  • 128 GB total capacity from eight 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM0 motherboard's DIMM slots

128GB DDR5-5600 ECC RDIMM kit

This 128GB kit contains eight 16GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. Each stick runs at 1.1V with CL46 latency and a 1Rx8 organisation. The 288-pin RDIMM form factor is designed for server motherboards that require registered memory.

Suited for GIGABYTE MZ73-LM0 server builds

The kit is validated for the GIGABYTE MZ73-LM0 motherboard and its DDR5-5600 memory controller. Registered buffering and on-die ECC keep every slot stable when fully populated. Builders using consumer boards, laptops, or systems that only accept unbuffered UDIMMs or SODIMMs cannot use these modules.

Eight modules fill most server channel counts

The 128GB total capacity covers typical multi-socket server workloads such as virtualisation, database caching, and large-scale compute. Populating all eight slots at the rated 5600MT/s speed depends on the motherboard's qualified vendor list and CPU memory-controller limits; exceeding the board's supported ranks per channel will force a lower data rate or prevent boot.

Punti di forza

  • 128 GB total capacity from eight 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM0 motherboard's DIMM slots

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Do I need a GIGABYTE MZ73-LM0 motherboard for this 8x16GB DDR5 5600 ECC RDIMM kit to work?

This kit is verified for the GIGABYTE MZ73-LM0 motherboard with DDR5 5600 support. The board must accept 288-pin registered ECC RDIMMs at 1.1V and follow its population rules for eight modules.

Will these 1Rx8 CL46 registered ECC modules run at full speed if I populate all eight slots on my GIGABYTE MZ73-LM0?

Yes. The registered architecture offloads the memory controller so every slot runs fully populated at the rated DDR5 5600 speed with CL46 timing and 1.1V.

How can I confirm the kit is recognised at 128GB and running at DDR5 5600 CL46 after installation?

Check the BIOS memory information or OS tools; they should show 128GB total, DDR5 5600 (PC5-44800) speed, CL46 latency, 1.1V voltage and ECC active on all eight DIMMs.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.