Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM DDR5 5600 288GB (6x48GB) ECC RDIMM CL46 1.1V Supermicro H13DSH memory upgrade

SKU CH-AMJ2-QGBJ9

Six 48 GB DDR5 5600 RDIMMs deliver 288 GB of registered ECC memory tuned for the Supermicro H13DSH at 1.1 V CL46

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 288 GB total capacity from six 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation matches the server's memory controller specification
  • Verified fitment for Supermicro H13DSH motherboard with 288-pin RDIMM form factor

288GB DDR5-5600 ECC RDIMM kit for Supermicro H13DSH

This 288GB kit contains six 48GB DDR5 5600 RDIMMs rated CL46 at 1.1V. Each module is a 2Rx8 registered ECC DIMM built with major OEM DRAM. The kit matches the Supermicro H13DSH memory controller requirements for full-capacity operation at rated speed.

Suited for administrators populating all slots

Registered ECC architecture offloads the memory controller so every slot runs fully populated while ECC corrects single-bit errors on the fly. Buyers needing unbuffered UDIMMs, SODIMMs, non-ECC modules, or a different voltage or speed should look elsewhere.

Fits a Supermicro H13DSH using 288-pin RDIMM slots

The 2Rx8 organisation and 1.1V operation align with the board's population rules for maximum capacity. No heat spreaders are included, so airflow in the chassis must be adequate. Verify the motherboard manual for approved DIMM order before installation.

Punti di forza

  • 288 GB total capacity from six 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation matches the server's memory controller specification
  • Verified fitment for Supermicro H13DSH motherboard with 288-pin RDIMM form factor

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What motherboard and DIMM slots are required to run this 6×48 GB DDR5-5600 CL46 1.1 V RDIMM kit?

The kit is validated for the Supermicro H13DSH motherboard, which provides 288-pin DDR5 RDIMM slots and the registered-memory controller needed for these 2Rx8 modules.

Can I mix these registered ECC DDR5 RDIMMs with unbuffered UDIMMs already in the system?

No, the H13DSH only accepts registered RDIMMs; inserting UDIMMs would prevent the memory controller from initialising the array.

How do I confirm the full 288 GB is running at DDR5-5600 CL46 after installation?

Check the BIOS memory-info screen or run dmidecode/lshw in the OS; both should report 6 × 48 GB modules at 5600 MT/s, CL46, 1.1 V with ECC active.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.