NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 288GB (6×48GB) CL46 1.1V for Supermicro H14SST-G memory upgrade
A 288 GB registered ECC DDR5 kit of six 48 GB modules running at 5600 MT/s with CL46 latency and 1.1 V for Supermicro H14SST-G servers
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 288 GB capacity from six 48 GB modules
- DDR5 5600 speed rated at PC5-44800
- Registered ECC design corrects single-bit errors automatically
- CL46 latency at 1.1 V operating voltage
- Verified fit for Supermicro H14SST-G motherboard
Exact DDR5-5600 upgrade for Supermicro H14SST-G
This NEMIX RAM kit delivers 288 GB of DDR5-5600 registered ECC memory in six 48 GB RDIMMs. The modules run at 1.1 V with CL46 timing and a 2Rx8 organisation, matching the electrical and mechanical requirements of the Supermicro H14SST-G motherboard. Registered buffering allows all slots to be populated at full capacity without overloading the memory controller.
Suited for fully populated server builds.
System administrators expanding a Supermicro H14SST-G to its maximum supported capacity will find the exact rank, voltage and timing the board expects. Workstations or consumer boards that accept only unbuffered UDIMMs cannot use these registered modules, and any platform limited to lower densities or different DDR generations will be incompatible.
Registered ECC RDIMM architecture
The single specification that decides fitment is the registered ECC RDIMM form factor combined with DDR5-5600 speed, 1.1 V operation and 2Rx8 rank structure. Only motherboards explicitly qualified for this combination will recognise the full 288 GB and run it at the rated 5600 MT/s data rate.
Punti di forza
- 288 GB capacity from six 48 GB modules
- DDR5 5600 speed rated at PC5-44800
- Registered ECC design corrects single-bit errors automatically
- CL46 latency at 1.1 V operating voltage
- Verified fit for Supermicro H14SST-G motherboard
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Domande su questo articolo
How do I install the six 48 GB DDR5 5600 RDIMMs in my Supermicro H14SST-G and which population step is often missed?
Populate all six slots following the motherboard manual's exact DIMM order; the step most often missed is verifying the approved population sequence for full 288 GB capacity.
What maintenance or replacement will this 288 GB DDR5 ECC RDIMM kit need over its service life?
No scheduled maintenance is required; if a module fails, replace the faulty 48 GB RDIMM with an identical DDR5 5600 CL46 1.1 V 2Rx8 part.
What limit appears first when the 288 GB kit runs sustained workloads at DDR5 5600?
The registered DDR5 5600 specification with CL46 latency and 1.1 V operation defines the sustained throughput ceiling.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



