NEMIX RAM
NEMIX RAM DDR5 5600 ECC Registered RDIMM 128GB (4x32GB) CL46 1.1V 2Rx8 Supermicro H13SSF memory upgrade
128 GB kit of four 32 GB DDR5-5600 ECC registered RDIMMs at 1.1 V CL46, validated for Supermicro H13SSF servers
- Capacity128GB (4 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 128 GB capacity across four 32 GB modules
- DDR5 5600 speed with CL46 latency
- Registered ECC design corrects single-bit errors
- 1 V operation matches server memory controller
- Verified fitment for Supermicro H13SSF motherboard
128GB DDR5 ECC RDIMM kit for Supermicro H13SSF
This 128GB kit consists of four 32GB DDR5 5600 Registered ECC modules built to the exact rank, voltage and timing the H13SSF memory controller expects. It is intended for administrators expanding a Supermicro H13SSF server to its full supported capacity with modules that are recognised at rated speed.
Thermals noise and power at 1.1V
Each module operates at 1.10V without a heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all slots are populated, helping the system maintain stable operation at the rated DDR5 5600 frequency. No acoustic or power-draw figures are provided by the supplier.
Replaces partial or slower memory configurations
The kit replaces smaller-capacity or lower-speed DIMM sets that leave slots empty or force the controller to down-clock. The upgrade is worth it when the workload needs the full 128GB at the native 5600 MT/s data rate with ECC protection. It is not for systems that require UDIMM or SODIMM form factors, non-ECC memory, or voltages other than 1.10V.
Punti di forza
- 128 GB capacity across four 32 GB modules
- DDR5 5600 speed with CL46 latency
- Registered ECC design corrects single-bit errors
- 1 V operation matches server memory controller
- Verified fitment for Supermicro H13SSF motherboard
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Domande su questo articolo
How do I install the 288-pin RDIMM kit on the Supermicro H13SSF, and which step is often missed?
Power down, open the chassis, and insert each 32 GB module into the slots listed first in the motherboard manual, pressing until both latches click; the step most often missed is confirming the exact population order for a four-DIMM 2Rx8 configuration so the server recognises the full 128 GB at DDR5-5600.
What maintenance or replacement will the 128 GB DDR5 ECC RDIMM kit need later?
No routine maintenance is required; the modules have no heat spreaders and run at 1.1 V, so only a failed DIMM would need replacement, which is covered by the lifetime replacement warranty.
What limit appears first when the 4 x 32 GB 2Rx8 RDIMM kit runs sustained workloads?
The registered buffer and ECC logic keep every slot stable at the rated CL46 5600 MT/s, so the first practical ceiling is the motherboard's maximum supported capacity rather than a thermal or signal-integrity bottleneck.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



