NEMIX RAM
NEMIX RAM DDR5 6400 384GB (4x96GB) ECC RDIMM CL52 1.1V Supermicro H14SST-GE memory upgrade
A 384 GB DDR5 ECC registered RDIMM kit of four 96 GB modules running at 6400 MT/s with CL52 latency and 1.1 V, validated for the Supermicro H14SST-GE motherboard
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384GB total capacity across four 96GB modules for dense server workloads
- DDR5-6400 speed with CL52 latency matches the board's rated timing
- Registered ECC design corrects single-bit errors and supports full population
- 10V operation meets the platform's specified voltage requirement
- 288-pin RDIMM form factor fits the Supermicro H14SST-GE memory slots
Exact-match server upgrade
This NEMIX RAM kit delivers 384 GB across four 96 GB DDR5 RDIMMs built for the Supermicro H14SST-GE motherboard. Registered ECC modules with 2Rx4 organisation provide the precise rank structure and voltage the platform expects.
Thermals and power
Modules operate at 1.10 V with no heat spreaders, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all slots are populated. Power draw scales with the 6400 MT/s data rate under typical enterprise workloads.
Capacity gate
The 384 GB total capacity is the single specification that determines fitment; the board must support this density in a four-DIMM configuration. Buyers needing lower capacity or unbuffered UDIMMs should select a different kit.
Punti di forza
- 384GB total capacity across four 96GB modules for dense server workloads
- DDR5-6400 speed with CL52 latency matches the board's rated timing
- Registered ECC design corrects single-bit errors and supports full population
- 10V operation meets the platform's specified voltage requirement
- 288-pin RDIMM form factor fits the Supermicro H14SST-GE memory slots
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Domande su questo articolo
How do I install the four 96GB DDR5 RDIMM modules in the Supermicro H14SST-GE, and which slot order does the manual require?
Power down the server, open the chassis, and insert each 288-pin module into the exact DIMM sequence shown in the motherboard manual; the registered design only works when every slot follows the board's population rules.
What maintenance or replacement will the 384GB DDR5 ECC RDIMM kit need over its service life?
No scheduled maintenance is required; if a module fails the lifetime replacement warranty covers a direct swap of the defective 96GB stick.
What limit appears first when the 4x96GB DDR5-6400 kit runs sustained workloads at 1.1V?
The registered buffer and ECC logic keep every slot stable at the rated 6400 MT/s, so the first constraint is the motherboard's maximum supported capacity rather than memory speed or voltage.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



