Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular DDR5 RDIMM circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 64GB 6400 CL52 2Rx4 ECC RDIMM memory upgrade

SKU CH-7PPN-6SB36

64 GB DDR5 6400 CL52 2Rx4 ECC Registered RDIMM for ASRock Rack TURIN2D16-2T/ROT motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB

Mostra altre 4 configurazioni
  • 64 GB capacity enables large workloads without swapping
  • DDR5 6400 speed transfers data at PC5-51200 bandwidth
  • CL52 latency keeps response tight under load
  • 2Rx4 registered ECC architecture corrects errors and scales to full population
  • 10 V operation matches server power envelope

Exact-match DDR5 RDIMM for ASRock Rack TURIN2D16-2T

This 64 GB DDR5 6400 module is a registered ECC RDIMM built to the precise rank, voltage and timing the motherboard expects. It installs as a single 288-pin DIMM so the server recognises the full capacity at rated speed. The 2Rx4 organisation and CL52 latency match the board's memory-population rules without further tuning. Builders who need a second DIMM or a different capacity should verify the manual before purchase.

Thermals noise and power in normal use

Operating at 1.1 V the module draws minimal power and runs without a heat spreader in typical server airflow. Registered buffering reduces electrical load on the memory controller, helping keep system thermals stable when all slots are populated. No active cooling is required beyond standard chassis fans. The design targets quiet, continuous operation in rack environments.

Build quality and day-to-day connectors

Major OEM DRAM from Samsung, Micron or Hynix underpins enterprise-grade reliability and on-die ECC correction. The 288-pin RDIMM keying prevents mis-installation in UDIMM or SODIMM slots. Registered architecture allows full-capacity population across every supported slot without signal degradation. Consult the motherboard manual for approved population order and installation steps.

Punti di forza

  • 64 GB capacity enables large workloads without swapping
  • DDR5 6400 speed transfers data at PC5-51200 bandwidth
  • CL52 latency keeps response tight under load
  • 2Rx4 registered ECC architecture corrects errors and scales to full population
  • 10 V operation matches server power envelope

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install the 288-pin RDIMM in the ASRock Rack TURIN2D16-2T/ROT and which slot order does the manual require?

Power down the server, open the chassis, locate the DDR5 DIMM slots on the motherboard, and insert the module following the population sequence listed in the ASRock Rack TURIN2D16-2T/ROT manual; the registered design only fits one way, so align the notch before pressing firmly until the latches click.

Will the ECC RDIMM need any firmware updates or periodic re-seating during its service life?

No firmware updates are required for the memory itself; the module operates at 1.10 V with CL52 timings and ECC correction runs automatically, so apart from keeping the server firmware current for platform stability, the DIMM is maintenance-free.

What thermal or electrical limit appears first when the 64 GB kit runs at 6400 MT/s continuously under full load?

The JEDEC-rated 1.10 V operating voltage and CL52 latency define the electrical envelope; sustained full-speed operation stays within that spec, so the first practical limit is the server chassis airflow keeping the unbuffered DRAM temperature within the manufacturer's rated range.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.