Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small black square 40x20mm fan with three wires

OEM Industries

OEM Industries AD0412LB-C52 40x20mm 12V 0.11A CPU cooler

SKU CH-WJX8-RNT64

A 40 mm square fan with ball bearing and three-pin 12 V power for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • LEDNo
  • Compact 40 mm frame fits tight builds
  • Ball bearing ensures long service life
  • 12 V 0.11 A draws minimal power
  • Three-wire tachometer enables speed monitoring
  • 40 x 20 mm footprint suits small-form-factor cases

Compact 40 mm cooler for tight builds

The AD0412LB-C52 is a 40 by 20 mm fan-only cooler that runs on 12 V at 0.11 A through a three-pin connector. Its ball bearing and black frame suit small-form-factor cases or inverter modules where height is limited.

Suits low-profile chassis, not high-heat CPUs

Builders fitting a 1U server, thin client or embedded board will appreciate the slim 20 mm profile and standard three-wire hookup. Systems with high-TDP desktop processors or overclocked chips should look elsewhere because the cooler provides no heatsink mass or heatpipes.

Drops into any 40 mm mount with three-pin power

The unit needs a 40 mm mounting grid and a motherboard or controller header that supplies 12 V on a three-pin plug. It frees vertical clearance above the socket and leaves surrounding RAM slots and VRM heatsinks unobstructed.

Punti di forza

  • Compact 40 mm frame fits tight builds
  • Ball bearing ensures long service life
  • 12 V 0.11 A draws minimal power
  • Three-wire tachometer enables speed monitoring
  • 40 x 20 mm footprint suits small-form-factor cases

Caratteristiche tecniche

ModelAD0412LB-C52
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
LEDNo

Domande su questo articolo

What fan header does my motherboard need for the 3-pin connector on this AD0412LB-C52?

A standard 3-pin or 4-pin fan header supplies the 12 V and tachometer signal this cooler requires.

Will the 40 mm frame fit in the same mounting holes as my existing 4020 fan?

Yes, the 40x20 mm dimensions match the 4020 standard, so existing screw holes line up directly.

How can I confirm the ball-bearing fan is spinning at the correct speed after installation?

Check the RPM reading in BIOS or monitoring software; it should report a steady value from the third wire.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.