Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 75mm square axial fan with 3-pin connector

OEM Industries

OEM Industries AD07512UX257300 75mm 12V 0.46A 3-pin CPU cooler

SKU CH-8QMB-4G0BQ

A 75mm 12V axial fan with ball bearing, 3800 RPM speed, 32 CFM airflow and 33.6 dBA noise level

  • ColorBlack
  • TypeFan only
  • Fan Size75mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 75 mm fan fits tight CPU sockets
  • 32 CFM airflow moves heat away from the processor
  • 3800 RPM speed with 10 % tolerance keeps cooling steady
  • 6 dBA noise level runs quietly in office builds
  • Ball bearing design extends fan life under continuous use

Compact 75 mm axial fan

This 75 mm axial fan delivers 12 V DC cooling for small-form-factor CPU sockets. It draws 0.46 A through a standard three-pin connector and fits mounting holes spaced 6.7 cm apart. The unit is intended for builders who need a low-profile replacement cooler in tight chassis.

Steady-state airflow and acoustics

At 3800 RPM with a ten percent tolerance the fan moves 32 CFM while producing 33.6 dBA. Ball-bearing construction maintains consistent speed under continuous load without the wear curve of sleeve bearings. The fixed voltage means airflow does not scale with motherboard PWM curves.

Direct three-pin installation

The three-wire connector plugs straight onto a CPU fan header; no adapter or controller is required. Mounting uses the 6.7 cm hole pattern so alignment is straightforward in compatible brackets. Builders needing PWM control or a larger heatsink surface will find this fan insufficient on its own.

Punti di forza

  • 75 mm fan fits tight CPU sockets
  • 32 CFM airflow moves heat away from the processor
  • 3800 RPM speed with 10 % tolerance keeps cooling steady
  • 6 dBA noise level runs quietly in office builds
  • Ball bearing design extends fan life under continuous use

Caratteristiche tecniche

ModelAD07512UX257300
ColorBlack
TypeFan only
Fan Size75mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Domande su questo articolo

How loud is the 75 mm fan at its rated 3800 RPM when it runs continuously?

The fan produces 33.6 dBA at its specified speed of 3800 RPM with a 10 % tolerance.

What power connection does the cooler require on the motherboard?

It uses a standard 3-pin connector and draws 0.46 A at 12 V from the CPU fan header.

Will the 6.7 cm mounting hole spacing match the retention bracket on my existing motherboard?

The cooler’s mounting holes are spaced 6.7 cm centre-to-centre; verify your board’s bracket matches that dimension before installing.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.