Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
130mm square metal-frame fan in two-tone finish, 38mm thick

OEM Industries

OEM Industries D1338B24B7CZ-15 130mm 24V 0.65A CPU cooler

SKU CH-17VE-0FV5K

A 130 mm ball-bearing fan running at 24 V and 0.65 A for server or inverter cooling

  • Color2-Tone
  • TypeFan only
  • Fan Size130mm
  • Bearing TypeBall
  • 130mm frame fits 12 cm server mounts
  • 24V 0.65A draw matches inverter power specs
  • Ball bearing reduces friction for longer life
  • Metal housing withstands industrial vibration and heat
  • Two-wire design simplifies replacement in SJ300 L300P units

OEM Industries D1338B24B7CZ-15 130mm Fan

This OEM Industries D1338B24B7CZ-15 is a 130mm DC fan built for 24V server or inverter cooling. It suits technicians maintaining SJ300 or L300P units that require a direct 2-wire replacement. The ball bearing and metal frame support continuous operation in industrial environments. Buyers needing PWM speed control or a 12V connector cannot use this model.

24V 2-Wire Interface Limits

The fan runs on a fixed 24V supply drawing 0.65A through a 2-wire lead. No speed signal or control wire is present, so the host cannot monitor RPM or adjust airflow. Voltage must match exactly; a 12V rail will not drive it and a higher rail risks damage. Systems without a dedicated 24V header need an external source.

130mm by 38mm Form Factor

Physical fit is decided by the 130mm square frame and 38mm thickness. Mounting holes follow the 13038 pattern used on the target inverter chassis. Any enclosure with different hole spacing or less than 38mm clearance will not accept this cooler. Verify the exact cut-out before ordering.

Punti di forza

  • 130mm frame fits 12 cm server mounts
  • 24V 0.65A draw matches inverter power specs
  • Ball bearing reduces friction for longer life
  • Metal housing withstands industrial vibration and heat
  • Two-wire design simplifies replacement in SJ300 L300P units

Caratteristiche tecniche

ModelD1338B24B7CZ-15
Color2-Tone
TypeFan only
Fan Size130mm
Bearing TypeBall

Domande su questo articolo

Which D1338B24B7CZ-15 version should I choose for my 24V server or inverter chassis?

The single listed model runs on 24V at 0.65A with a 130mm ball-bearing frame, so select this unit when your power rail matches those specifications.

What does the 0.65A current draw mean once the fan is installed in a real machine?

At 24 volts the motor pulls 0.65 amps, giving a predictable load on the server or inverter power supply without unexpected spikes.

What interface does the 2-wire connector use and what does it cap in practice?

The two-wire lead provides simple 24V DC power with no PWM or tachometer signals, so speed is fixed at the rated voltage and cannot be software-controlled.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.