Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black square 80mm cooling fan with orange LED and two wires

OEM Industries

OEM Industries JF0825S1M 80mm 12V 0.15A 2-wire CPU cooler

SKU CH-XXH9-51EAM

An 80 mm sleeve-bearing fan with orange LED runs on 12 V at 0.15 A via a two-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDOrange
  • Efficient 12V cooling with low 0.15A draw
  • Compact 80mm square frame fits tight chassis spaces
  • Sleeve bearing runs quietly at reduced friction
  • Two-wire power connector simplifies motherboard installation
  • Orange LED adds subtle visual status indication

Compact 80 mm CPU fan for tight builds

This 80 mm square fan fits standard 8025 mounting holes and draws 0.15 A at 12 V. It is designed as a direct replacement cooler for small-form-factor systems or legacy sockets where larger towers cannot be installed.

Sleeve bearing and two-wire power lead

The sleeve bearing keeps running noise low at typical speeds while the two-wire connector supplies power without PWM control. Orange LED illumination adds a subtle glow visible through vented side panels.

Replaces worn 80 mm coolers in older chassis

Swapping out a rattling or failed 80 mm unit restores adequate airflow for low-TDP processors. The jump is worthwhile when the existing cooler has seized or when the original heatsink is retained and only the fan needs renewal.

Punti di forza

  • Efficient 12V cooling with low 0.15A draw
  • Compact 80mm square frame fits tight chassis spaces
  • Sleeve bearing runs quietly at reduced friction
  • Two-wire power connector simplifies motherboard installation
  • Orange LED adds subtle visual status indication

Caratteristiche tecniche

ModelJF0825S1M
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDOrange

Domande su questo articolo

Does the 2-wire 12 V 0.15 A fan support PWM speed control?

The JF0825S1M uses a 2-wire connector supplying 12 V at 0.15 A, so it runs at fixed speed and cannot accept a PWM signal.

Will the 80 mm square frame with 25 mm thickness fit my existing 80 mm mounting holes?

Yes, the fan measures 80 mm by 80 mm with a 25 mm depth, matching the standard 80 mm square mounting pattern.

How do I connect the bare 2-wire leads to a motherboard 3-pin or 4-pin header?

Match the red lead to the 12 V pin and the black lead to ground; leave the tachometer pin empty, then secure the connector so it cannot shift onto adjacent pins.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.