Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OEM Industries
A compact 12 V 0.19 A fan and heatsink with nine blades and a two-pin connector for graphics-card cooling
This 12V 0.19A cooler combines a nine-blade fan with a heatsink for component thermal management. The two-wire power connector delivers fixed-speed operation without pulse-width modulation control. It is intended for builders fitting a compact air-cooling solution onto a graphics card or similar add-in board. The two-tone finish distinguishes the unit visually inside a chassis.
Verify that the target board provides a two-pin 12V header rated for at least 0.19A before ordering. Confirm physical space around the component slot so the heatsink and fan assembly can sit without fouling adjacent slots, capacitors or cable routing. The fixed-speed design means the fan runs continuously whenever the header is powered. No four-pin PWM or three-pin tachometer signal is supported by this connector.
The aluminium heatsink draws heat from the component base while the nine-blade fan moves air across the fins. Two-pin power simplifies wiring but removes speed monitoring and automatic curve control. The 12V 0.19A rating keeps current draw low for standard headers. Daily use brings constant airflow noise at full voltage with no software-adjustable quiet mode.
| Model | MGT5012XB-W10 |
|---|---|
| Color | 2-Tone |
| Type | Fan & Heatsinks |
| Power Connector | 2 Pin |
| LED | No |
The package contains the cooling fan with heatsink, 9-blade impeller, and 2-pin power connector ready to install.
This model uses a fixed 2-pin connector; no other connector options are offered for the MGT5012XB-W10.
It draws 0.19 amps from a 12 volt rail, so the fan runs within standard motherboard or graphics-card header limits.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?