Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 60mm square cooling fan with 3-pin connector

OEM Industries

OEM Industries MGT6012HB-A25 60mm 12V 0.17A 3-pin CPU cooler

SKU CH-VSYN-6JP4R MPN MGT6012HB-A25

60 mm ball-bearing fan delivers 12 V cooling for compact CPU heatsinks

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 60 mm footprint fits tight builds
  • Ball bearing ensures long-lasting reliability
  • 12 V 0.17 A draws minimal power
  • 3-pin connector enables speed monitoring
  • Fan-only design keeps weight low

Compact 60 mm CPU fan for tight builds

The OEM Industries MGT6012HB-A25 is a 60 mm square frame fan designed to mount directly on a low-profile heatsink or in a confined chassis. It runs on 12 V and draws 0.17 A through a standard three-pin connector. The ball bearing and black finish suit small-form-factor desktops and embedded boards where space is at a premium.

Fan-only package means you supply the heatsink

No heatsink, mounting hardware or thermal compound is included in the box. The 3-wire lead provides power and tachometer feedback but no PWM control, so speed is regulated by voltage. Builders must pair the 6025 frame with a compatible sink and verify that the motherboard header can drive a 0.17 A load.

Straightforward screw mount with one common snag

Four corner holes accept standard M3 screws for direct heatsink attachment. The three-pin plug fits any 12 V header, yet the lack of a fourth PWM wire means some modern boards will report a CPU fan error unless the header is set to voltage mode. Clearance around the 25 mm thick frame should be checked before installation.

Punti di forza

  • Compact 60 mm footprint fits tight builds
  • Ball bearing ensures long-lasting reliability
  • 12 V 0.17 A draws minimal power
  • 3-pin connector enables speed monitoring
  • Fan-only design keeps weight low

Caratteristiche tecniche

ModelMGT6012HB-A25
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Domande su questo articolo

How often will the ball bearing in this 60 mm fan need replacement under normal use?

Ball bearings typically run for tens of thousands of hours; expect several years of continuous operation before any bearing service is required.

What limit appears first when this 12 V 0.17 A cooler runs at full speed for hours?

The 0.17 A current draw at 12 V defines the steady-state thermal ceiling; the small 60 mm frame and airflow must shed that heat continuously.

How much noise and heat does the 6025 frame produce when running all day at 12 V?

With no LED and a ball bearing, the unit runs quietly at low RPM; the 12 V 0.17 A draw means modest heat output even during extended use.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.