Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 92mm square DC fan with ball bearing and three-wire connector

OEM Industries

OEM Industries V92E12BMA7-52 T07 92mm CPU cooler

SKU CH-3F5E-AWWDR

A 92 mm ball-bearing fan rated at 12 V and 0.62 A with a three-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeBall
  • LEDNo
  • 92 mm square frame fits tight spaces
  • Nidec 9238 motor built for continuous operation
  • Ball bearing reduces friction for longer life
  • 12 V 0.62 A draws modest power from header
  • Three-wire connector reports speed to motherboard

92 mm Nidec DC Fan

This 92 mm square DC fan from Nidec carries model V92E12BMA7-52 T07 and runs on 12 V at 0.62 A. It uses a three-wire, three-pin connection and a ball bearing. The frame is black and has no LED lighting. The unit is supplied new and is sold as a fan only.

Best for 92 mm mounts needing a 12 V three-pin fan

Builders replacing a 92 mm cooler fan with a matching voltage and connector will find this unit suitable. It is not intended for systems that require PWM control, larger fan diameters, or integrated heatsink assemblies. Buyers needing RGB illumination or a different pin layout should look elsewhere.

Fits standard 92 mm square mounting holes

The fan installs directly into any 92 mm square mounting pattern using the three-pin header for power and speed reporting. No additional brackets or adapters are included. Its low 0.62 A draw leaves ample headroom on typical fan headers. Ensure the case or heatsink provides the correct 92 mm spacing before ordering.

Punti di forza

  • 92 mm square frame fits tight spaces
  • Nidec 9238 motor built for continuous operation
  • Ball bearing reduces friction for longer life
  • 12 V 0.62 A draws modest power from header
  • Three-wire connector reports speed to motherboard

Caratteristiche tecniche

ModelV92E12BMA7-52
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeBall
LEDNo

Domande su questo articolo

What motherboard header does the 3-pin connector on this V92E12BMA7-52 T07 cooler plug into?

The 3-wire 3-pin connector fits a standard 12 V fan header on the motherboard; the board must supply 12 V at up to 0.62 A for the NIDEC 9238 motor to run.

Will this 92 mm ball-bearing fan clear a low-profile heatsink on an older socket board?

The fan frame is a 92 mm square DC cooler, so it mounts on 92 mm hole patterns; verify the heatsink’s fan-clip spacing and height allowance before fitting.

How can I confirm the V92E12BMA7-52 is spinning at the correct speed after installation?

Connect the 3-pin header, power on, and read the RPM reported in BIOS or a monitoring utility; a steady reading shows the ball-bearing NIDEC 9238 motor is operating.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.