Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with gold edge connector and black memory chips

OWC

OWC 2GB DDR3 1333 PC3-10600 CL9 1Rx8 204-pin 1.5V Non-ECC SODIMM memory upgrade

SKU CH-B1GD-YG0RC

A 2GB DDR3 1333 SODIMM module for upgrading compatible ASUSTOR NAS models

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Boosts multitasking in compatible ASUSTOR NAS with 2GB DDR3 1333 speed
  • Meets OEM specs for AS-602T AS-604T AS-606T AS-608T models
  • JEDEC and RoHS compliant for warranty-safe memory upgrade
  • Simple DIY install using standard 204-pin SODIMM form factor
  • Runs at 1.5V CL9 latency for stable low-power operation

Compatible NAS upgrade

This 2 GB DDR3 SODIMM is built for ASUSTOR AS-602T, AS-604T, AS-606T and AS-608T units. It runs at 1333 MHz with CL9 latency on a 1.5 V unbuffered 204-pin module. The single-rank 1Rx8 design meets JEDEC and RoHS standards for a warranty-safe installation.

Replaces factory 2 GB stick

It directly substitutes the ASUSTOR AS-RAM2G part when the original module has failed or when a matching stick is needed for dual-channel operation. The upgrade is worthwhile only if the NAS reports a memory fault or the workload demands an identical second module.

2 GB single-module limit

The kit provides exactly 2 GB of non-ECC capacity in one slot. It handles light file serving and basic multimedia tasks but runs out quickly with virtualisation, heavy transcoding or large ZFS pools. Buyers who want more storage or larger memory arrays need higher-capacity modules or additional slots not addressed by this part.

Punti di forza

  • Boosts multitasking in compatible ASUSTOR NAS with 2GB DDR3 1333 speed
  • Meets OEM specs for AS-602T AS-604T AS-606T AS-608T models
  • JEDEC and RoHS compliant for warranty-safe memory upgrade
  • Simple DIY install using standard 204-pin SODIMM form factor
  • Runs at 1.5V CL9 latency for stable low-power operation

Caratteristiche tecniche

BrandOWC
Part Number1S3D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemASUSTOR AS-602T
ASUSTOR AS-604T
ASUSTOR AS-606T
ASUSTOR AS-608T

Domande su questo articolo

Will this 204-pin DDR3 SODIMM fit the memory slot in my ASUSTOR AS-604T?

Yes — the module matches the 204-pin DDR3 SODIMM form factor required by the AS-602T, AS-604T, AS-606T and AS-608T series.

What is the correct way to seat the module, and which step do people often miss?

Align the notch on the gold edge with the key in the slot, press the module in until the contacts are fully hidden, then push down until the side clips snap into the notches on both edges.

Does this 1.5 V non-ECC DDR3 module need any firmware updates or periodic replacement after installation?

No firmware update is needed; the JEDEC-standard 1.5 V DDR3 module runs without maintenance, and OWC provides a limited lifetime warranty with free technical support.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.